User manual INDESIT FIE36KBGB1

[. . . ] Ventilation To ensure good ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). Positioning  Keep packaging material out of the reach of children. It can become a choking or suffocation hazard.  The appliance must be installed by a qualified person in compliance with the instructions provided. Incorrect installation may cause harm to persons, animals or may damage property. [. . . ] When preheating is finished, the THERMOSTAT indicator light will stay on: place the food in the oven. You may do the following during cooking: - change the cooking mode by turning the SELECTOR knob. - change the temperature by turning the VARIABLE GRILL knob. - stop cooking by turning the SELECTOR knob to the “0” position. Never put objects directly on the oven bottom to avoid damaging the enamel coating. Always place cookware on the rack(s) provided. * Only on certain models 5 Cooking modes GB Cooking modes !GRILL (recommended: set only to MAX power level); Thermostatically controlled oven (Fan Assisted Mode) When the SELECTOR knob is turned in a clockwise direction to the symbol z the fan and oven light will come on to assist in the defrosting of frozen food. Rotating further to the complete range of temperatures shown on the dial you can choose which is most suitable for the food you are going to cook. The temperature is reached automatically and controlled by the oven thermostat (from 60°C to MAX). Whilst using tag oven for conventional VARIABLE GRILL knob must be set with “MAX” in line with the reference mark on the control panel. GRILL mode The top heating element comes on. The programme will stop automatically at 10:15 a. m. Setting the end time for a cooking mode  A cooking duration must be set before the cooking end time can be scheduled. Follow steps 1 to 3 to set the duration as detailed above. Next, press the the four digits on the DISPLAY begin to flash. use the “+” and “-” buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. and Programming has been set when the buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately. Cancelling a programme To cancel a programme: button until the icon corresponding to • press the the setting you wish to cancel and the digits on the display are no longer flashing. Press the “-” button until the digits 00:00 appear on the display. [. . . ] • When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable. • Never carry out any cleaning or maintenance work without having unplugged the plug from the mains. Disposal • Observe local environmental standards when disposing packaging material for recycling purposes. Observe existing legislation when disposing of the old appliance. • The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. [. . . ]