User manual INDESIT GSF4100

[. . . ] CAUTION:  prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug. To IMPORTANT:  One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U. S. Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights. TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] If there is a submenu, press [ ] button to enter the submenu. 5. Press [MENU] button to return to the previous menu, or press [MENU] button several times to exit the OSD menu. 16 GSF4100 NOTE:  This item is functional only when {Color temperature} is set to {User}. Smart contrast When turned on, this function helps enhance image contrast when displaying dark scenes. Smart picture The following smart picture modes are available for: • PC mode: {Standard} / {Highbright} / {sRGB}. • Video mode: {Standard} / {Highbright} / {Cinema}. Video source Select a video input source.            Clock phase Adjust to improve the focus, clarity and stability of the image. NOTE:  This item is functional for VGA input only. Zoom mode The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). The 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. The following zoom modes are available for: • PC mode: {Full} / {Normal} / {Custom} / {Real}. PIP size Select the size of the sub picture in the PIP (Picture-in-Picture) mode. Choose from: {Small} / {Medium} / {Large}. PIP audio Select the audio source in the PIP (Picture-in-Picture) mode. • {Main} - Select audio from the main picture • {Sub} - Select audio from the sub picture. PIP reset Reset all settings in the PIP menu to factory preset values. NOTES: • The PIP function is available only for the following condition: {Configuration1} - {Panel saving} - {Pixel shift} setting to [Off] and {Advanced option} - {Tiling} - {Enable} setting to [No]. • The PIP function is available only for certain signal source combinations as shown in the table below. • The availability of the PIP function will also depend on the resolution of the input signal being used. Main Picture Sub Picture Displayport HDMI DVI-D VGA YPbPr Video USB Card OPS Displayport X X X O O O X X HDMI X X X O O O X X DVI-D X X X O O O X X VGA O O O X X X O O YPbPr O O O X X X O O Video O O O X X X O O USB X X X O O O X X Card OPS X X X O O O X X (O: PIP function available, X: PIP function unavailable) 18 GSF4100 By pressing the [PIP ON/OFF] button on the remote control, you can change the mode in the order shown below: PIP POP PBP aspect PBP full Off Panel saving Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”. • {Cooling Fan} - Select {On} to turn on the cooling fan all the time. Select {Auto} to turn on/off the cooling fan according to the display’s temperature. The resolutions in the PIP and POP modes are configured as follows: PIP SIZE {Small} {Large} : 320 x 240 pixels : 640 x 480 pixels {Medium} : 480 x 320 pixels POP SIZE 474 x 355 pixels : NOTE:  The images displayed in the sub picture always fit the PIP sizes shown above irrespective of the aspect ratio of the input image. NOTES: • The default {Auto} option will start running the cooling fan if the temperature of 60°C (140°F) is reached, and will keep running for 30 minutes after cooling down to the temperature of 58°C (137°F). • A temperature-warning message will be shown on the screen if the temperature reaches 79°C (174°F). [. . . ] If water or moisture gets inside the unit, operating problems, electrical and shock hazards may result. • Do not scratch or hit the cabinet with fingers or hard objects of any kind. • Do not use volatile substances such as insert sprays, solvents and thinners on the cabinet. • Do not place anything made from rubber or PVC near the cabinet for any extended periods of time. 27 GSF4100 7. 2. Troubleshooting Possible Cause 1. The power cord is disconnected. [. . . ]