User manual INDESIT H 391 F

[. . . ] Follow the local laws applicable for external air evacuation. Before connecting the model to the electricity network: - control the data plate (positioned inside the appliance) to ascertain that the voltage and power correspond to the network and the socket is suitable. If in doubt ask a qualified electrician figure 1C. [. . . ] Fix the appliance to the wall and align it in horizontal position to the wall units. When the appliance has been adjusted, definitely fix the hood using the screws A2 (Fig. 5). For the various installations use screws and screw anchors suited to the type of wall (e. g. reinforced concrete, plasterboard, etc. ). If the screws and screw anchors are provided with the product, check that they are suitable for the type of wall on which the hood is to be fixed. · Fixing the decorative telescopic flue Take care not to scratch the duct; wear gloves when removing the protective film. Arrange the electrical power supply within the dimensions of the decorative flue. If your appliance is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening. Adjust the width of the support bracket of the upper flue (Fig. 4). Then fix it to the ceiling using the screws A (Fig. 4) in such a way that it is in line with your hood and respecting the distance from the ceiling indicated in Fig. 2. Connect the flange C to the air exhaust hole using a connection pipe (Fig. 5). Insert the upper flue into the lower flue and rest above the frame. Extract the upper flue up to the bracket and fix it with the screws B (Fig. 4). To transform the hood from a ducting version into a filtering version, ask your dealer for the charcoal filters and follow the installation instructions. [. . . ] · The light on the cooker hood is designed for use during cooking and not for general room illumination. Extended use of the light reduces the average duration of the bulb. · Replacing halogen light bulbs (Fig. [. . . ]