User manual INDESIT HIP6FIX

[. . . ] 2) For the filtering version, the air vent grilles (H) must be positioned at the top. For the ducting version, turn the upper flue upside down so that the air vent grilles are at the bottom. 10 GB 3) Ducting version: a) Connect the air vent of the hood to the air vent hole using a flexible hose of 15 cm diameter. Lock the flexible hose with hose clamps (hose and clamps not provided). [. . . ] Lift the upper flue up to the ceilingand secure it using the 2 screws (L). C) Lift the lower flue holding it firm with some adhesive tape and connect the flexible hose to the reducer (E) with a hose clamp (not provided). Arrange the electrical power supply within the decorative flue dimensions. When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself. In case your appliance is not furnished with a non separating flexible cable and has no plug, or has not got any other device ensuring omnipolar disconnection from the electricity main, with a contact opening distance of at least 3 mm, such separating device ensuring disconnection from the main must be included in the fixed installation. If your unit features a power lead and plug, position this so the plug is accessible. 9 Kg Total 270 W Motor 1x190 W Lamps 2x40 W 585 m3/h Gross weight Absorption Flow rate Grease filters Suction surface area 1487 cm2 2287 cm2 12 Description The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible). Ducting version The hood aspirates air from the kitchen impregnated with fumes and smells, passes it through the grease filters and then expels it to the outside through an exhaust duct. For this version the charcoal filter does not need to be used. Wash the filters by hand or in the dishwasher using a neutral detergent. If they are washed in the dishwasher, any loss of colour will not jeopardise functioning of the filters in any way. Clean the grease filters every 2 months on average depending on how heavily the hood is used. Unscrew the bulb and replace it with a bulb of the same type. Re-assemble the light fitting by pushing it into its seat from the outside. 15 Precautions and tips General safety !The distance between the supporting surface for the cooking vessels on the hob and the lower part of the hood must be at least 65 cm. If the instructions for installation for the hob specify a greater distance, this has to be taken into account. This appliance has such technical particulars that it belongs to class II insulation, therefore it must not be earthed. Avoid using materials which could cause spurts of flame (flambées) near the appliance. When frying, take particular care to prevent oil and grease from catching fire. [. . . ] It is therefore advisable to ensure the room contains air taps able to ensure a steady flow of fresh air. Disposal The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. [. . . ]