User manual INDESIT INF140G

[. . . ] • When positioning the display, make sure the power plug and outlet are easily accessible. • When turning off the display by detaching the power cord, wait for 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. [. . . ] Press the PLUS button to increase color intensity, or press the MINUS button to decrease it. COLOR TEMPERATURE Select a color temperature for the image. The image has a reddish tint with a lower color temperature, whilst a higher color temperature gives off a more bluish tint. Use the PLUS/MINUS button to make selection. RETURN TO THE CONTENTS User Manual INF140G COLOR CONTROL Note: This function is only available when COLOR TEMPERATURE is set to USER. With this function you can adjust the color tones of the image precisely by changing the R (Red), G (Green) and B (Blue) settings independently. Press the SET/PLUS button to open the submenu. Press the UP/DOWN button to select R, G or B, and press the PLUS/MINUS button to adjust. LIGHT SENSOR Choose to enable or disable the ambient light sensor. Once enabled, the image brightness will be adjusted automatically when the ambient lighting conditions change. Use the PLUS/MINUS button to make selection. RETURN TO THE CONTENTS User Manual INF140G • 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). CUSTOM ZOOM Note: This item is only available when ZOOM MODE is set to CUSTOM. You can use this function to further customize the zoom settings to suit the image you want to display. Press the SET/PLUS button to open the submenu. Use the UP/DOWN button to toggle between the following items, and use the PLUS/MINUS button to adjust. • ZOOM - Expands the horizontal and vertical sizes of the image simultaneously. • HZOOM - Expands the horizontal size of the image only. • VZOOM - Expands the vertical size of the image only. • H POSITION - Moves the horizontal position of the image left or right. • V POSITION - Moves the vertical position of the image up or down. SCREEN RESET Reset all settings in the SCREEN menu. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu. RETURN TO THE CONTENTS User Manual INF140G 4. 2. 3. [. . . ] • Do not allow any water or detergent to come into contact with the surface of the display. If water or moisture gets inside the unit, operating problems, or electrical and shock hazards may result. • Do not scratch or hit the cabinet with fingers or hard objects of any kind. • Do not use volatile substances such as sprays, solvents and thinners on the cabinet. [. . . ]