User manual INDESIT IWC6125

[. . . ] Description of the washing machine and starting a wash cycle, 4-5 Control panel Indicator lights Starting a wash cycle Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] 3) Short wash cycle for cottons: set wash cycle 4 with a temperature of 40°C. Specials wash cycles Express (wash cycle 10) this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and therefore saves both energy and time. By selecting this wash cycle (10 at 30°C), it is possible to wash different fabrics together (except for wool and silk items), with a maximum load of 1. ); for best results, we recommend not exceeding the maximum load indicated in the "Table of wash cycles". ); for best results, we recommend not exceeding the maximum load indicated in the "Table of wash cycles". we recommend using a liquid detergent and dosage suitable for a half-load. Sport Shoes (wash cycle 13) is for washing sports shoes; for best results, do not wash more than 2 pairs simultaneously. Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle. The maximum spin speeds available for each wash cycle are as follows: Wash cycles Maximum spin speed Cottons 1200 rpm Synthetics 800 rpm Wool 600 rpm Silk drain only . The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed set for each wash cycle. The various wash functions available with this washing machine will help to achieve the desired results, every time. The function is enabled when the corresponding indicator light is illuminated. Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle. Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of enables you to wash in less lightly soiled cotton and synthetic fabrics (refer to the "Table of wash cycles"). time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity. This function may not be used in conjunction with wash cycles 1, 2, 7, 8, 9, 10, 11, 12, 13, Please remember to pour the bleach into extra compartment 4 (see Bleach cycle). This function may not be used in conjunction with wash cycles 1, 7, 8, 9, 10, 11, 12, 13, This function may not be used in conjunction with wash cycles 10, Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching the set programme. [. . . ] Wash it under running water; this operation should be repeated frequently. Unscrew the lid by rotating it anti-clockwise (see figure): a little water may trickle out. This is perfectly normal; Always leave the porthole door ajar in order to prevent unpleasant odours from forming. Reposition the panel, making sure the hooks are securely in place before you push it onto the appliance. [. . . ]