User manual INDESIT IWDE 7145 B

[. . . ] Instructions for use WASHER-DRYER Contents Installation, 2-3 GB English, 1 GB F Français, 13 DE Deutsch, 25 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the Washer-dryer, 4-5 ES Español, 37 Control panel Display How to run a wash cycle or a drying cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options IWDE 7145 Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Precautions and tips, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water or electricity supply Cleaning the Washer-dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB  This instruction manual should be kept in a safe place for future reference. If the Washer-dryer is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features.  Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] 3) Short wash cycle for cottons: set wash cycle 4 with a temperature of 40°C. Wash options Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled cotton and synthetic fabrics (refer to the "Table of wash cycles"). “ ” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.  This function may not be used in conjunction with cycles 1, 2, 6, 7, 8, 9, 10, 11, 12, 13, , , . Easy iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the Washer-dryer will perform slow rotations of the drum; the indicator lights for the EASY IRON and START/PAUSE options will flash (the first one green, the second orange). To end the cycle, press the START/PAUSE button or the EASY IRON button. For the 7 wash cycle, the machine will end the cycle while the laundry is soaking and the EASY IRON and START/PAUSE indicator lights will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.  This function may not be used in conjunction with cycles 6, 9, 10, 11, 12, 13, , . Note: If you also want to run the drying cycle, this option is enabled only if combined with level “A1” (Iron dry). Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. it is particularly useful for sensitive skin.  This function may not be used in conjunction with cycles 11, 12, 13, , . Delay start To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the corresponding indicator light will remain lit. To remove the delayed start setting, press the button until the text "OFF" appears on the display.  This option can be used in conjunction with all cycles. 7 Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution.  Do not use hand washing detergents because these create too much foam. Open the detergent dispenser drawer and pour in the detergent or washing additive, as 3 follows. [. . . ] The water inlet hose is not connected to the tap. The START/PAUSE button has not been pressed. The Washer-dryer does not take in water ("H2O" will flash on the display). The Washer-dryer continuously takes in and drains water. [. . . ]