User manual INDESIT SIAA10

[. . . ] - The appliance has been used for normal domestic purposes only. - The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any person not authorised by us. - Any repair work must be undertaken by us or our appointed agent. - Any parts removed during repair work or any appliance that is replaced become our property. [. . . ] The cable should be cut as close as possible to the moulded plug. WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else. fitting a new plug IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. Green and Yellow Blue Brown - Earth - Neutral - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: or - Connect Green and Yellow wire to terminal marked 'E' or coloured Green and Yellow. If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use. CE Marking certifies that this appliance conforms to the following EEC directives: Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/ 68/EEC PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24 5 GB Installation !Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. Stability bracket WARNING: To prevent the fridge from tilting forwards, it must be held in place with the stability bracket supplied. This is the responsibility of the customer. start-up and use Starting the appliance !Before starting the appliance, follow the installation instructions (see Installation). Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. Insert the plug into the socket and ensure that the internal light illuminates. After a few hours you will be able to put food in the refrigerator. Setting the temperature The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob. = warmest = coldest We recommend , however , a medium position. [. . . ] • The TEMPERATURE CONTROL Knob is on setting. €¢ The door do not close properly or the seals are damaged. €¢ The door are opened too frequently. €¢ The TEMPERATURE ADJUSTMENT knob is not in the correct position • The refrigerator have been over-filled. [. . . ]