User manual INFINITI I35 2002

[. . . ] FOREWORD Your INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior craftsmanship with a simple, refined aesthetic sensitivity associated with traditional Japanese culture. The result is a different notion of luxury and beauty. The car itself is important, but so also is the sense of harmony that the vehicle evokes in its driver, and the sense of satisfaction you feel with the INFINITI --from the way it looks and drives to the high level of retailer service. [. . . ] Be sure the vehicle is fully stopped before attempting to shift the selector lever. This automatic transmission is designed so the foot brake pedal must be 5-8 WARNING CAUTION Do not depress the accelerator pedal while shifting from P or N to R, D, 3, 2 or 1. Always depress the brake pedal until shifting is completed. Failure to do so could When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. STARTING AND DRIVING The foot brakes should be used for this purpose. WARNING Apply the parking brake if the selector lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. If the key is turned to OFF or ACC for any reason while the vehicle is in R (Reverse), N (Neutral), or any D (Drive) position, the key cannot be turned to LOCK and be removed from the ignition switch. Additionally, the selector lever cannot be moved to P (Park) from N (Neutral) or any D (Drive) position. The selector lever can be moved from R (Reverse) to P (Park) with the key in the OFF or ACC position. If the key cannot be turned to LOCK, perform the following steps: 1. Apply the parking brake when the vehicle is stopped. Turn the key to ON while depressing the foot brake pedal. Turn the ignition key to LOCK to remove the key. P (Park): Use this selector position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal must be depressed to move the selector lever from N (Neutral) or any drive position to P (Park). When parking on a hill, apply the parking brake first, then move the lever to the P (Park) position. Shifting SIS0092 After starting the engine, fully depress the brake pedal and shift the selector lever from P (Park) to R (Reverse), D (Drive), or any of the desired shift positions. 5-9 STARTING AND DRIVING CAUTION Use this position only when the vehicle is completely stopped. R (Reverse): Use this position to back up. Always be sure the vehicle is completely stopped when selecting R (Reverse). The brake pedal must be depressed to move the selector lever from P (Park), N (Neutral) or any drive position to R (Reverse). N (Neutral): Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to N (Neutral) and restart a stalled engine while the vehicle is moving. D (Drive): 5-10 Use this position for all normal forward driving. 3 (Third gear): For driving up and down long slopes where engine braking would be advantageous. [. . . ] 2-7 Warranty, Emission control system warranty. . . . . . . . . . . 10-21 Washer switch, Windshield wiper and washer switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]