Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual INFINITY TSS-CENTER1100. We hope that this INFINITY TSS-CENTER1100 user guide will be useful to you.
Lastmanuals help download the user guide INFINITY TSS-CENTER1100.
Manual abstract: user guide INFINITY TSS-CENTER1100
Detailed instructions for use are in the User's Guide.
[. . . ] TSS-4000
TOTAL SPEAKER SOLUTIONS
TSS-CENTER1100 Owner's Guide
INTRODUCTION
Infinity Total SolutionsTM
Infinity Total Solutions TSS-CENTER1100 center channel loudspeaker is designed to perfectly complement Total Solutions speakers. It provides exceptional dialogue reproduction and a seamless transition between the front channels. The horizontal design allows for maximum placement flexibility.
PLANNING YOUR SYSTEM
Before deciding where to best place your speakers, survey your room and study Figures 1 and 2.
Left Front Channel
Center Channel (above or below TV)
Right Front Channel
Subwoofer
About This Guide
Please read this guide completely before connecting and operating the TSS-CENTER1100 center channel speaker. [. . . ] Use high-quality speaker wire to make the connections. Consult the owner's manuals included with your amplifier or receiver for connection and operation procedures.
Important!
Do not exceed the tilt range. Doing so may cause the speaker to fall out of its stand.
Surround Modes
When using the TSS-CENTER1100 in a Dolby* Digital or DTS® home theater system, make sure the amplifier or receiver center channel speaker modes are set to "Small. "
Wiring and Polarity
The TSS-CENTER1100 speaker has gold-plated terminals that can accept bare wire. To ensure proper polarity, connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker, as shown in Figure 4. Connect the (black) terminals in a similar way. See the owner's manuals that were included with your amplifier or receiver to confirm connection procedures.
Important!
Do not reverse polarities (i. e. , + to or to +) when making connections. Doing so will degrade the imaging and bass response of the home theater system. After correctly placing and wiring the TSS-CENTER1100 and the rest of your speaker system, adjust the levels for all of the channels as recommended by the manufacturer of your amplifier or receiver.
Figure 3.
+
Figure 4. This example shows how to connect bare wires to the terminals. Banana plugs may also be inserted directly into the rear of the connector. Insert bare ends; tighten terminals.
CARE OF YOUR SPEAKER SYSTEM
When needed, use a soft cloth to remove any fingerprints or to wipe off dust. Do not use any cleaning products or polish. [. . . ] Infinity and MMD are registered trademarks, and Total Solutions is a trademark, of Harman International Industries, Incorporated. 400-OMCNTR 5/05 Laurent Rault Harman Consumer Group International Chateau-du-Loir, France 5/05 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INFINITY TSS-CENTER1100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual INFINITY TSS-CENTER1100 will begin.
