User manual INFOCUS IN26

[. . . ] For model-specific information and more cabling options, see computer connection How-To Guides at www. infocus. com/support/howto Computer OR Connect to: DVD or VCR* (using optional cables) 1 Connect video using either an S-Video or a Composite Video cable www. infocus. com/store part no. SP-SVIDEO-10M or SP-CPSTVID-5M 2 Connect audio using an RCA Audio cable www. infocus. com/store part no. OR ! Better Composite Video Cable RCA Audio Cable Good L R Video Out Audio Out DVD or VCR * Also for game console or cable box. Want better sound? Connect the source's audio output to a receiver/amplifier or home theater system with separate speakers. L R Audio Out RCA Audio Cable To Projector (see above) L R Video Out Audio In DVD or VCR Home Theater or Receiver OR Connect to: Other kinds of sources How-To Guides are available at www. infocus. com/support/howto 4 Turn on projector and source 1 Connect the power cord to the projector and to an electrical outlet The green power light on the projector will turn on. 2 Turn on the projector Press power (on the projector or remote). The power light will start blinking. 3 5-10 sec. Wait for the lamp to warm up After a few seconds, the power light will stop blinking and stay on. [. . . ] If the power light is on but not blinking, press the power button. Make sure the video source (computer, DVD player, VCR, etc. ) is turned on and cables are securely connected between the source and the projector. Make sure your computer's video port is enabled. Press the key combination that activates your laptop's external video port (see step 4 ). If there is still no image, restart your laptop. You may need to press it several times to view the correct source. Press the Auto Image button. If "Signal out of range" is shown, or the picture looks bad Press the Auto Image button. If that doesn't help (and the source is a computer), reduce your computer's display resolution or vertical refresh rate. If the replace lamp light is on Turn the projector off and wait at least one minute, then turn it on again. If the replace lamp light turns on again, the lamp needs to be replaced. For lamp replacement instructions, see the Reference Guide, which is on the included CDROM or can be downloaded at www. infocus. com/support If the high temperature light is on Turn the projector off and remove anything that may be blocking the air vents on its side. Leave the projector off for at least one minute to let it cool before turning it on again. Important: Continuous operation at high temperature may reduce the lifetime of the lamp and/or projector. If the service required light is on Turn the projector off and wait at least one minute, then turn it on again. If the service required light turns on again, the projector needs to be serviced. Visit www. infocus. com/service or call InFocus support to arrange for service. More troubleshooting options are in the Reference Guide The Reference Guide is on the included CD-ROM, or download it at www. infocus. com/support Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. Keep out of the area under and around the projector when it is turned on. See the safety instructions booklet for more details. Questions?InFocus is here to help! Visit us at: www. infocus. com/support InFocus is here to support you with your new purchase. · Determining screen sizes · Documentation in other languages · Connecting your sources (TV, DVD, Cable/Satellite, Game, etc. ) · Selecting optional accessories · Product warranty protection plans USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific techsupport@infocus. com Asia Pacific Customer Support Telephone Singapore: 800-101-1864 China: 800-828-2268 Australia: 1800-630-957 New Zealand: 0800-449-854 Mon-Fri, 9 am - 5 pm SGT asia-support@infocus. com Europe, Middle East, Africa Customer Support Telephone +31 (0)36 539 2820 Mon-Fri, 08:30 - 18:00 CET emea. support@infocus. com Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www. lamprecycle. org Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. [. . . ] Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user's authority to operate the equipment. Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. [. . . ]