User manual INFOCUS IN34

[. . . ] The power light will start blinking green. 3 5-10 sec. Wait for the lamp to warm up After a few seconds, the power light will stop blinking and turn green. It can take a minute for the lamp to reach full brightness. Warning: Do not look directly into the lens when the projector is turned on. 4 Turn on computer or other source You may need to press a specific key combination to activate your laptop's external video port. [. . . ] Make sure your computer's video port is enabled. Press the key combination that activates your laptop's external video port (see step 4 ). If there is still no image, restart your laptop. You may need to press it several times to view the correct source. Press the Auto Image button. source If "Signal out of range" is shown, or the picture looks bad Press the Auto Image button. If that doesn't help (and the source is a computer), reduce your computer's display resolution or vertical refresh rate. If the replace lamp light is on Turn the projector off and wait at least one minute, then turn it on again. If the replace lamp light turns on again, the lamp needs to be replaced. For lamp replacement instructions, see the Reference Guide, which is on the included CD-ROM or can be downloaded at www. infocus. com/support If the high temperature light is on Turn the projector off and remove anything that may be blocking the air vents on its side. Leave the projector off for at least one minute to let it cool before turning it on again. Important: Continuous operation at high temperature may reduce the lifetime of the lamp and/or projector. If the service required light is on Turn the projector off and wait at least one minute, then turn it on again. If the service required light turns on again, the projector needs to be serviced. See below for service contact information. More troubleshooting options are in the Reference Guide The Reference Guide is on the included CD-ROM, or download it at www. infocus. com/support Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. Keep out of the area under and around the projector when it is turned on. See the safety instructions booklet for more details. Questions?We're here to help! Visit us at: www. infocus. com/support We're here to support you with your new purchase. · Determining screen sizes · Documentation in other languages · Connecting your sources (TV, DVD, Cable/Satellite, Game, etc. ) · Selecting optional accessories · Product warranty protection plans USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific techsupport@infocus. com Asia Pacific Customer Support Telephone Singapore: +65 63539449 China: 800. 828. 2268 Australia: 1300-725-295 Australia Direct Sales: 1800-885-841 Mon-Fri, 9 am - 5 pm SGT asia-support@infocus. com Europe, Middle East, Africa Customer Support Telephone +31 (0)36 539 2820 Mon-Fri, 08:30 - 18:00 CET emea. support@infocus. com Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www. lamprecycle. org Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. [. . . ] may void the user's authority to operate the equipment. EN 55022 Warning This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. [. . . ]