User manual INFOCUS SP50MD10

[. . . ] InFocus HDTV Remote Hexcodes Including Discrete Hexcodes Label/Function 1 2 3 ON-OFF TV DVD (RCA default of 3000); AUX/AUX-HD programmed to 3000; AUX/AUX-HD programmed to universal DVD VCR (RCA default of 2000); AUX/AUX-HD programmed to 2000 SAT/CABLE (RCA default of 5000 SAT1); AUX/AUXHD programmed to 5000 SAT1 or AUX programmed to universal SAT or CABLE) SAT/Cable (programmed to 5001 SAT2 or AUX/AUXHD programmed to 5001 SAT1 AUX (default 2001 VCR2; any VCR programmed to AUX or AUX-HD) AUDIO default 4003; AUDIO or AUX programmed to 4003; AUDIO or AUX programmed to universal amp or AV receiver AUDIO or AUX programmed to 4004 AUDIO or AUX programmed to RCA PHONO 4005 or universal PHONO AUDIO or AUX programmed to RCA TAPE 4006 or universal TAPE AUDIO or AUX programmed to RCA CD 4007 or universal CD player GO BACK CH+ CH MUTE VOL+ VOLGUIDE CLEAR Hexcode 0D5 0C5 AC5 Comments* Power Toggle for last-used mode of remote Discrete TV Power On Discrete RCA DVD Power On; Works with AutoTuning Feature Discrete RCA DVD Power On; Works with AutoTuning Feature Discrete RCA SAT/Cable Power On; Works with AutoTuning Feature Discrete RCA SAT/Cable Power On; Works with AutoTuning Feature Discrete RCA VCR2 Power On; Works with AutoTuning Feature Discrete RCA AUDIO Receiver Power On; Works with AutoTuning Feature 33 Label/Function INPUT INPUT+0 = INPUT+1 = INPUT+2 = Hexcode 05C 054 055 056 057 058 075 076 077 (8 code) (9 code) 0C4 0E2 0EA 0E3 0E8 0E0 0E6 0AC 00F 0A5 0E1 0FA 033 034 0E4 03C 01A 06F 035 036 037 067 0F3 0ED 021 022 023 024 025 026 07F - Comments* Toggle to next input (video source) Discrete Front Input (video source) (N/A to Slim DLP) Discrete Input 1 (composite/S-video source) Discrete Input 2 (composite/component video source) Discrete Input 3 (composite/S-video source) Discrete Input 4 (composite/component video source) Discrete HDMI/DVI Input (video source) Discrete DTVLink Input (video source) then toggle UNDEFINED Discrete Input (video source) Discrete TV Power Off 4 5 1C5 8C5 INPUT+3 = INPUT+4 = INPUT+5 = 5 BC5 INPUT+6 = INPUT+7 = INPUT+8 = INPUT+9 = INPUT+ON-OFF = Discrete Off REVERSE PLAY FORWARD RECORD STOP PAUSE SKIP LOW VOLTAGE (LVD) SOUND BACKLIGHT ANT-CAB Discrete Cable Input Discrete Antenna Input PIP SWAP CH CTRL FORMAT Discrete "Normal" Screen Format Discrete "Stretch" Screen Format Discrete "Zoom" Screen Format Discrete "Cinerama" Screen Format FREEZE PRESETS Discrete Vibrant (Day) Picture Preset Discrete Natural Picture Preset Discrete Cinematic (Night) Picture Preset Discrete Videogame Picture Preset Discrete Professional Picture Preset Discrete Personal Picture Preset CC FAV 6 7 2C5 3C5 7 7 4C5 5C5 34 35 36 37 38 39 40 7 7 8 9 10 11 12 13 14 15 6C5 7C5 0D8 0D2 0D3 0C0 0D0 0D1 0E5 0F9 Last channel; go back to previous menu or exit main menu Channel Up; Page+ in Guide Channel Down; Page- in Guide Note: In remote, Volume Punchthrough to Audio Amp can be assigned. [. . . ] Note 1: By default, the TV responds to the 0 ("TV1") preamble. However, this can be changed in the Connections > Special Features > Remote Setup menu so that the TV responds to either the 5 ("TV2") or E ("TV3") remote preambles. (This might be done to avoid command conflicts if there are 2 or 3 TVs within IR range of each other and you want to control each TV independently). If that change is made in the menu, then the TV responds to the hexcodes listed here, but with the assigned preamble (e. g. , OK is now 50B or E0B instead of the default 00B). When making this change, the remote must also be programmed; see the User's Manual for instructions. Note 2: Whereas the TV and remote will be able to be switched to support TV2 and TV3 preamble, the KBR755TA1 keyboard cannot. [. . . ] FAV+5 = "FAV 5" 0x84 (PPM5) FAV+6 = "FAV 6" 0x85 (PPM5) FAV+7 = "FAV SEARCH" 0xD7 (PPM5) FAV+8 = 8 (8 code) FAV+9 = 9 (9 code) * For a complete description of remote functions (excluding discretes), see User's Manual. [. . . ]