User manual INFORAD K1

[. . . ] Insert the adapter into the cigarette lighter in your vehicle, remove the cap (F) on your INFORAD device and connect the USB port (E) to the cigarette lighter adapter. 5 - Mounting clip To release your INFORAD K1 from its mounting clip, press on the side tabs. SATELLITE ALERTS: Searching for satellites Device operational, INFORAD is protecting you Blinking green LED Steady green LED + melody - Make sure that the INFORAD logo on your device is pointing skywards. Make sure that your INFORAD device is installed as close as possible to the leading edge of the windscreen. [. . . ] It is supplied pre-loaded with a database containing the location and operating direction of over 17, 000 speed cameras across Europe. INFORAD has a team of people constantly verifying this evolution to ensure the best possible coverage. Nevertheless, if you discover an anomaly or a new speed camera position that is not in our latest database, please let us know by using our INFORAD MANAGER software (risk area information form) or our Web site (join the Inforad community). The database evolves continually so as to always ensure that you have maximum protection. Consequently, we recommend that you update your INFORAD device every week using INFORAD MANAGER. The approach and departure distance of speed camera alarms, enable and use the onboard trip recorder, diagnose faults, manage your own user-defined Points of Interest (POIs), download database updates. Please check that your `broadband' or `dial-up' Internet connection is running properly. If the `broadband' or `dial-up' connection is working, go to the next step. If you encounter problems with your Internet connection via INFORAD MANAGER, this may be caused by the anti-virus or firewall software installed on your PC. In this case, you will need to disable the application during the update process. If after following all these points your problem persists, please refer to the `Technical Support' link which can be found in the `Help' section in the INFORAD MANAGER software. You should complete the form describing your problem. We will investigate the problem and endeavour to resolve it for you as quickly as possible. Alternatively, you may send our support team an email. (See Online technical support at the end of this document). In order to use IFM, you will need to first download the software from the web site (see end of document for web address). If after completing the installation process, no icon appears on your desktop, the chances are your installation was not successful. First of all, make sure that you have correctly installed INFORAD MANAGER on your PC. Switch on your INFORAD device and connect it to a USB port on your PC. Once done, click on the `start' button displayed on the `welcome page' to begin detection of your device. If after a few seconds INFORAD MANAGER is unable to detect your device, make sure that your INFORAD device is connected properly and, where necessary, reconnect your INFORAD to another USB port on your PC. Ensure that your INFORAD is connected directly to the PC and not to a `docking bay' used with certain laptops. [. . . ] Uk - You may encounter other alarms during the self-test diagnostic or when you connect to your PC. The "crossed-out bin" symbol indicates that this product and the batteries it contains cannot be disposed of with household waste. they are subject to a specific type of sorting. Deposit the batteries and your unusable electronic product in an authorised collection area for recycling. [. . . ]