User manual INOVALLEY SM300

[. . . ] Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only. This marking is located on the laser protective housing inside the enclosure. This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. [. . . ] Each time you press the button, the system tunes in one preset station. · You can select the preset station number directly by pressing the number buttons. What is the Radio Data System? The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display. The station name appears on the TV screen as well. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name* appears in the front panel display. * If an RDS broadcast is not received, the station name may not appear in the front panel display. · RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak. · Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. · While receiving an RDS broadcast, each time you press DISPLAY, the display in the front panel display changes as follows: Station name t Frequency t Preset number t Stream information/Decoding status* t Station name t . . . * Does not appear depending on the setting of [Surround Setting]. 36GB Other Operations Using the Control for HDMI Function for "BRAVIA" Sync This function is available on TVs with the "BRAVIA" Sync function. By connecting Sony components that are compatible with the Control for HDMI function via an HDMI cable, operation is simplified. · Some functions can only be used if the connected TV is compatible, and require prior setting via the TV. Refer to the operating instructions of the TV. · To use the System Audio Control function, you need to make an audio connection between the system and TV (page 14). You can use the System Audio Control function as follows: · When the system is turned on, the sound of the TV or other components can be output from the speakers of the system. The time can be preset in intervals of 10 minutes. Press SLEEP. x [Test Tone] The speakers will emit a test tone to adjust [Level]. [Off]: The test tone is not emitted from the speakers. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. Each time you press SLEEP, the minutes display (the remaining time) in the front panel display changes by 10 minutes. When you set the sleep timer, the remaining time appears every 5 minutes. When the remaining time is less than 2 minutes, "SLEEP" flashes in the front panel display. Other Operations To check the remaining time Press SLEEP once. 1 2 3 4 5 6 7 8 9 Set [Test Tone] to [On]. Press X/x to select [Level], then press . Press X/x to select the desired speaker type, then press . Press C/c to select the left or right speaker, then press X/x to adjust the level. Press . To change the remaining time Press SLEEP repeatedly to select the desired time. Deactivating the Buttons on the Unit (Child Lock) You can deactivate the buttons on the unit (except for "/1) for preventing misoperation, such as child mischief (child lock function). Press x on the unit for more than 5 seconds. Repeat Steps 3 to 5. [. . . ] If the detected even if [Scan] is desired wireless router is still not detected, press RETURN to select [Manual performed. The system cannot connect to the · The distance between the unit and the wireless LAN router is too far (page 19). network or the network connection is unstable. 58GB Playable Discs Blu-ray Disc DVD3) Note on playback operations of a BD/DVD Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a BD/DVD according to the disc contents the software producers designed, some playback features may not be available. BD-ROM1) BD-R/BD-RE2) DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD CD3) Note about double-layer BDs/ DVDs The playback picture and sound may be momentarily interrupted when the layers switch. 1)Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. [. . . ]