User manual INSTROTECH RALLYTIME III

[. . . ] Page 1 of 2 pages www. instrotech. com. au __________________________________________________________________________________________ RALLYTIME III RALLYTIME III NEW GENERATION RALLY CLOCKS RALLYTIME III RALLY TIMING CLOCK RALLYTIME III is a third generation rally timing clock. RALLYTIME I was developed in 1984 and RALLYTIME II in 1989. These timing devices have been used in South African Regional, National and International Rallies with great success and reliability. [. . . ] 00 seconds to go) are available as an accessory and can be driven from the RALLYTIME III connector. Start times can now be set to any time on the second and not limited to the nearest minute. This will allow for the restart in time order or exact time starts for handicap races. The clock will also drive the existing countdown lights __________________________________________________________________________________________ P O Box 509, Torrens Park SA 5062, Australia FreeCall 1800 999 063 Tel (08) 8373 5677 Fax +61 8 8373 5667 email: info@instrotech. com. au Page 2 of 2 pages www. instrotech. com. au __________________________________________________________________________________________ RALLYTIME III (red-amber-green) and can also drive both types simultaneously. These ultrabright LED displays and lights require a lot of power and must be used with an external 12V DC power source as before. The clocks' internal battery is charged from this accessory when it is connected. The countdown lights housing is weatherproof polycarbonate with red perspex front and comes with a tripod mount and connector socket and cable. Master clocks for documentation and regroup points are available as accessories and are driven by the RALLYTIME III with GPS. These master clocks also require a 12V DC external supply and will keep the RALLYTIME III charged whilst connected. The master clocks will display HH:MM:SS and be accurate to one second. RS-232 serial output on the clock can be set for driving a 2-digit countdown display (59 . . . 00 seconds for Start Controls), a master clock (HH:MM:SS for Documentation), direct printout of full times and car numbers, line-by-line printout as each car passes the control, or for computer downloads. These are in three selectable formats including CSV for spreadsheets, RALLYTIME III printout report and the backward compatible RALLYTIME II printout report. GPS technology allows the control positions to be displayed to ensure their correct location. The coordinates are also included in the printout reports. The GPS is also used to check that the control has been closed off if the clock is moved. [. . . ] For long life and reliability they should be protected from exposure to direct sunlight and rain. Accessories available are infra-red transmitter and receiver beams, mounting kits including battery and charger for beams, stop push-buttons, countdown lights, countdown lamps, tripods, extension cable reels, 12V cables with battery clamps, mains battery chargers and carrying cases. For additional details please contact South Africa info@instrotech. co. za Australia info@instrotech. com. au __________________________________________________________________________________________ P O Box 509, Torrens Park SA 5062, Australia FreeCall 1800 999 063 Tel (08) 8373 5677 Fax +61 8 8373 5667 email: info@instrotech. com. au [. . . ]