User manual INTEGRA DTR-50.2

[. . . ] AV Receiver DTR-50. 2 Instruction Manual Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Install in accordance with the manufacturer's instructions. [. . . ] When using your DVD player's progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. To view the TV picture while setting the delay, press Enter. To return to the previous screen, press Return. If HDMI Lip Sync is enabled ( 62) and your TV or display supports HDMI Lip Sync, the displayed delay time will be the summation of the A/V Sync delay time and the HDMI Lip Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses. Note · A/V Sync is disabled when the Direct listening mode is used with an analog input source. · "A/V Sync" is not operable when the input selector is set to "NET/USB". Name Edit You can enter a custom name for each individual input selector (excluding Tuner) and radio preset for easy identification. When entered, the custom name will appear on the display. The custom name is edited using the character input screen. Name 1 2 Use / / / to select a character, and then press Enter. Repeat this step to enter up to 10 characters. When you've finished, to store a name, be sure to use / / / to select "OK", and then press Enter. Otherwise it will not be saved. En 57 Name input area 4-4. Name Edit Name Picture Adjust BD/DVD a n 1 { b o c p d q e r f s 6 < g t 7 > h u i v j w k x l y m z Using "Picture Adjust", you can adjust the picture quality and reduce any noise appearing on the screen. To view the TV picture while setting, press Enter. To return to the previous screen, press Return. Note · If you are using the analog RGB input, the following settings have no effect: "Film Mode", "Edge Enhancement", and "Noise Reduction". · "Picture Adjust" is not operable when the input selector is set to "NET/USB". 2 3 } | Shift +10 4 5 : Space 8 9 0 ?Back Space CLR ­ OK All Erase ` Shift A N ![ BC OP @# ] Shift +10 D E QR $% ; ' Space F S ^ , G T & . H U I V ( J W ) K X _ L Y M Z ~ / Back Space CLR OK All Erase Shift Shift*1: Switches the displayed character. (Left)/ (Right): Selected when the cursor is moved within the Name input area. BackSpace*2: "BackSpace" moves the cursor backward one character space. In addition, "BackSpace" deletes the character to the left of the cursor. [. . . ] Turn on the power of the Blu-ray Disc/DVD player/recorder. Start playback of the Blu-ray Disc/DVD player/ recorder, and confirm the following. · The power of the AV receiver is turned on automatically, and input with the Blu-ray Disc/DVD player/recorder connected is selected. · The power of the TV is turned on automatically, and input with the AV receiver connected is selected. [. . . ]