User manual INTEL D845GEBV2 OCTOBRE 2002

[. . . ] Intel® Desktop Board D845GEBV2/D845GERG2 Technical Product Specification October 2002 Order Number: C14584-001 The Intel® Desktop Board D845GEBV2/D845GERG2 may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D845GEBV2/D845GERG2 Specification Update. Revision History Revision -001 Revision History First release of the Desktop Board D845GEBV2/D845GERG2 Technical Product Specification. Intel® Date October 2002 This product specification applies to only standard Intel® Desktop Boards D845GEBV2 and D845GERG2 with BIOS identifier RG84510A. 86A. Changes to this specification will be published in the Intel Desktop Board D845GEBV2/D845GERG2 Specification Update before being incorporated into a revision of this document. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. [. . . ] Figure 23 shows the locations of the localized high temperature zones. A B D C OM13584 A B C D Processor voltage regulator area Processor Intel 82845GE GMCH Intel 82801DB ICH4 Figure 23. Localized High Temperature Zones 82 Technical Reference Table 45 provides maximum case temperatures for the Desktop Board D845GEBV2/D845GERG2 components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the Desktop Board D845GEBV2/D845GERG2. Table 45. Thermal Considerations for Components Maximum Case Temperature For processor case temperature, see processor datasheets and processor specification updates 83 C (under bias) 110 C (under bias) o o Component Intel Pentium 4 processor Intel 82845GE GMCH Intel 82801DB ICH4 For information about Intel Pentium 4 processor datasheets and specification updates Refer to Section 1. 3, page 19 83 Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification 2. 13 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Bellcore Reliability Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF data is calculated from predicted data at 55 ºC. The MTBF calculations for the Desktop Boards are as follows: · · Desktop Board D845GEBV2 MTBF: 108748 hours Desktop Board D845GERG2 MTBF: 111270 hours 2. 14 Environmental Table 46 lists the environmental specifications for the Desktop Boards D845GEBV2 and D845GERG2. Table 46. Parameter Temperature Non-Operating Operating Shock Unpackaged Packaged 50 g trapezoidal waveform Velocity change of 170 inches/second Half sine 2 millisecond Product Weight (pounds) <20 21-40 41-80 81-100 Vibration Unpackaged Packaged 5 Hz to 20 Hz: 0. 01 g² Hz sloping up to 0. 02 g² Hz 20 Hz to 500 Hz: 0. 02 g² Hz (flat) 10 Hz to 40 Hz: 0. 015 g² Hz (flat) 40 Hz to 500 Hz: 0. 015 g² Hz sloping down to 0. 00015 g² Hz Free Fall (inches) 36 30 24 18 Velocity Change (inches/sec) 167 152 136 118 -40 °C to +70 °C 0 °C to +55 °C Desktop Board D845GEBV2/D845GERG2 Environmental Specifications Specification 84 Technical Reference 2. 15 Regulatory Compliance This section describes the Desktop Boards' compliance with U. S. and international safety and electromagnetic compatibility (EMC) regulations. 2. 15. 1 Safety Regulations Table 47 lists the safety regulations the Desktop Boards D845GEBV2 and D845GERG2 comply with when correctly installed in a compatible host system. Table 47. Regulation CSA C22. 2 No. 60950/ rd UL 60950, 3 Edition, 2000 EN 60950, 2 Edition, 1992 (with Amendments 1, 2, 3, and 4) IEC 60950, 2 Edition, 1991 (with Amendments 1, 2, 3, and 4) EMKO-TSE (74-SEC) 207/94 nd nd Safety Regulations Title Bi-National Standard for Safety of Information Technology Equipment including Electrical Business Equipment. (USA and Canada) The Standard for Safety of Information Technology Equipment including Electrical Business Equipment. (European Union) The Standard for Safety of Information Technology Equipment including Electrical Business Equipment. (International) Summary of Nordic deviations to EN 60950. (Norway, Sweden, Denmark, and Finland) 2. 15. 2 EMC Regulations Table 48 lists the EMC regulations the Desktop Boards D845GEBV2 and D845GERG2 comply with when correctly installed in a compatible host system. Table 48. Regulation FCC (Class B) ICES-003 (Class B) EN55022: 1998 (Class B) EMC Regulations Title Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B, Radio Frequency devices. (USA) Interference-Causing Equipment Standard, Digital Apparatus. (Canada) Limits and methods of measurement of Radio Interference Characteristics of Information Technology Equipment. (European Union) Information Technology Equipment ­ Immunity Characteristics Limits and methods of measurement. (European Union) Australian Communications Authority, Standard for Electromagnetic Compatibility. (Australia and New Zealand) Limits and methods of measurement of Radio Disturbance Characteristics of Information Technology Equipment. (International) Information Technology Equipment ­ Immunity Characteristics ­ Limits and Methods of Measurements. (International) EN55024: 1998 AS/NZS 3548 (Class B) CISPR 22, 3 Edition (Class B) CISPR 24: 1997 rd 85 Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification 2. 15. 3 · · · · · · · Product Certification Markings (Board Level) The Desktop Boards D845GEBV2 and D845GERG2 have the following product certification markings: UL joint US/Canada Recognized Component mark: Consists of lower case c followed by a stylized backward UR and followed by a small US. [. . . ] continued 124 Error Messages and Beep Codes Table 79. Code AE B1 00 Runtime Code Uncompressed in F000 Shadow RAM (continued) Description of POST Operation Uncompress SMBIOS module and init SMBIOS code and form the runtime SMBIOS image in shadow. Going to copy any code to specific area. Going to give control to INT-19 boot loader. 5. 3 Bus Initialization Checkpoints The system BIOS gives control to the different buses at several checkpoints to do various tasks. Table 80 describes the bus initialization checkpoints. Table 80. Checkpoint 2A 38 39 95 Bus Initialization Checkpoints Description Different buses init (system, static, and output devices) to start if present. [. . . ]