User manual INTEL DESKTOP BOARD DH61ZE

[. . . ] Intel Desktop Board DH61ZE Product Guide Order Number: G45215-003 Revision History Revision -001 -002 -003 Revision History First release of the Intel Desktop Board DH61ZE Product Guide Second release of the Intel Desktop Board DH61ZE Product Guide Third release of the Intel Desktop Board DH61ZE Product Guide Date October 2011 November 2011 November 2011 Disclaimer INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL?S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. [. . . ] Figure 19 shows the location of the internal headers and connectors on Intel Desktop Board DH61ZE. Figure 19. Internal Headers 43 Intel Desktop Board DH61ZE Product Guide Front Panel Audio Header The front panel audio header shown in Figure 19, A supports both Intel High Definition Audio and AC ?97 Audio. Table 4 shows the pin assignments and signal names for HD Audio and Table 5 shows the pin assignments and signal names for AC ?97 Audio. Front Panel Audio Signal Names for Intel HD Audio Pin 1 3 5 7 9 Signal Name PORT 1L (Microphone) PORT 1R (Microphone) PORT 2R (Headphone) SENSE_SEND PORT 2L (Headphone) Pin 2 4 6 8 10 Signal Name Ground PRESENCE# SENSE1_RETURN KEY (no pin) SENSE2_RETURN Table 5. Front Panel Audio Header Signal Names for AC ?97 Audio Pin 1 3 5 7 9 Signal Name MIC MIC_BIAS FP_OUT_R No connection FP_OUT_L Pin 2 4 6 8 10 Signal Name AUD_GND PRESENCE# AUD_GND KEY (no pin) AUD_GND S/PDIF Header Figure 19, B shows the location of the S/PDIF output header. Table 6 shows the pin assignments and signal names for the S/PDIF output header. S/PDIF Header Signal Names Pin 1 2 3 4 Description Ground S/PDIF Out Key (no pin) +5 VDC 44 Installing and Replacing Desktop Board Components Chassis Intrusion Header Figure 19, C shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. This switch should be in the open position when the chassis cover is installed and closed when the cover is removed. Table 7 shows the pin assignments and signal names for the chassis intrusion header. Chassis Intrusion Header Signal Names Pin 1 2 Description Intruder# Ground TPM Header The TPM header is shown in Figure 19, D. Table 8 shows the pin assignments and signal names for TPM header. TPM Header Signal Names Pin 1 3 5 7 9 11 13 15 17 19 Signal Name CK_33M_TPM_DIP LFRAME# PLTRST# LAD3 +3. 3 V LAD0 No connection +3. 3 VSB Ground LPCPD# Pin 2 4 6 8 10 12 14 16 18 20 Signal Name Ground Key (no pin) No connection LAD2 LAD1 Ground No connection TPM_SERRQ TPM_CLKRUN# No connection 45 Intel Desktop Board DH61ZE Product Guide Front Panel Header Figure 19, E shows the location of the front panel header. Table 9 shows the pin assignments and signal names for the front panel header. Front Panel Header Signal Names Pin 1 3 5 7 9 Description In/Out Pin 2 4 6 In Power Power Out 10 No pin 8 Description Power LED Front panel LED+ Front panel LEDOn/Off Switch Power switch Ground Not Connected In Out Out In/Out Hard Disk Drive Activity LED Hard disk LED pull-up to +5 V Out Hard disk active LED Reset Switch Ground Reset switch Out NOTE When connecting individual wires from your chassis front panel to the front panel header, be sure to observe the connection polarity. Positive wires are usually solid color and negative wires are usually white or striped. Alternate Front Panel Power LED Header Figure 19, F shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If your chassis has a three-pin power LED cable, connect it to this header. Table 10 shows the pin assignments for the alternate front panel header. Alternate Front Panel Power LED Header Signal Names Pin 1 2 3 Signal Name Front panel LED+ No pin Front panel LEDOut In/Out Out 46 Installing and Replacing Desktop Board Components Serial Header Figure 19, G shows the location of the serial header. Table 11 shows the pin assignments and signal names for the serial header. Serial Port Header Signal Names Pin 1 3 5 7 9 Signal Name DCD (Data Carrier Detect) TXD# (Transmit Data) Ground RTS (Request To Send) RI (Ring Indicator) Pin 2 4 6 8 10 Signal Name RXD# (Receive Data) DTR (Data Terminal Ready) DSR (Data Set Ready) CTS (Clear To Send) Key (no pin) Front Panel USB 2. 0 Headers Figure 19, H shows the location of the front panel USB 2. 0 headers and Table 12 shows the pin assignments and signal names. [. . . ] Japan VCCI (Voluntary Control Council for Interference) mark. Korea Certification mark. Includes an adjacent KCC (Korean Communications Commission) certification number: KCC-REM-CPU-DH61ZEB3. Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. [. . . ]