User manual INTELLINET 519021

[. . . ] Modularized 24+2G Switch 3/2004 519021 Modularized 24+2G Access Switch COPYRIGHT All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photo copying, recording or otherwise, without the prior written permission of the publisher. FCC WARNING This equipment has been tested and found to comply with the limits for class A device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. [. . . ] Reboot Reboot the Switch with a software reset. 3. Console 1K Xmodem Update Firmware The Switch provides a 1k Xmodem to update firmware via console. The application only works in 38400bps mode. There are two cases where by the 1K Xmodem is used: A, B, User enters "1K Xmodem receiver mode" through pressing any key within 3 seconds after system is powered on. The system automatically enters "1K Xmodem receiver mode" if it detects the firmware checksum fail while booting. 2-5-15. Network Tree The "web cluster" feature will search switch nodes connected to the local network, and allows users to add/delete any network node(s) to/from the network tree. So that users not only have a network view, but also access or control switches or nodes from the local switch's web interface. Follow the screen cues by cliking any key . 37 38 Modularized 24+2G Switch Modularized 24+2G Switch 2. By clicking on the connected button, you will see "CCCC. . . "displayed on console. Select 1K Xmodem in the Protocol item, and specify the path where the image file is to be sent. Finish download image - the switch system will update firmware automatic. Update firmware ok - the switch will reboot. 39 40 Modularized 24+2G Switch Modularized 24+2G Switch 4. The Switch features a serial interface to manage and to monitor the system. User can follow the Console Port Information provided by web to use windows HyperTerminal program to link the Switch. You can type user name and password to login. The default user name is "admin", with no default password. 4-1. Main Menu There are six items on the Main Menu page. They are as follows: Switch Static Configuration: Protocol Related Configuration: Status and Counters: Reboot Switch: TFTP Update Firmware: Logout: Configure the Switch. Restart the system or reset Switch to default configuration. Exit the menu line program. <Control Key> The control key provided in all menus as follow: Tab: Backspace: Enter: Space: Move the cursor to next item. Toggle selectable items 41 42 Modularized 24+2G Switch Modularized 24+2G Switch 4-2. Port Configuration This page allows the configuration of each port. [. . . ] Name VID Default 1 v176 176 v102 102 v2 2 v254 254 VLAN Configuration Table Port Member (port #) untagged tagged 11, 12, 21~24 25, 26 1~6 25, 26 5~10 25, 26 13~18 25, 26 25, 26 no else else else else else Step 3. Edit "Default" VLANs Step 2 . Create VLAN Group : v176, 102, v2, v254 [Switch Static Configuration] [VLAN Configuration] [Create a VLAN Group] 103 104 Modularized 24+2G Switch Modularized 24+2G Switch Select VLAN mode (802. 1Q) PVID configuration: please refer to "PVID Configuration Table" PVID Configuration Table Port # 176 1~8 102 9~14 2 15~20 254 25, 26 1 (default) 21~24 PVID Step 2 . Create VLAN Group : v176, 102, v2, v254 [Switch Static Configuration] [VLAN Configuration] [Create a VLAN Group] VLAN configuration: please refer to "VLAN Configuration Table" [Switch Static Configuration] [VLAN Configuration] [Edit/Delete a VLAN Group] VLAN configuration: please refer to "VLAN Configuration Table" above. [. . . ]