User manual INTELLINET 521505

[. . . ] Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. 1. 3. Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. 1. 4. Antenna Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. 1. 5. Typical Operating Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. 2. [. . . ] The PC card for your laptop is designed with an integrated diversity antenna which would increase the receiving and transmitting sensitivity. 1. 2. Product Feature IEEE 802. 11b Direct Sequence high rate compatible. Based on DSSS Technology and support the modulation of PBCC mode High-Speed wireless connection up to 22Mbps data rate, and supports 11/5. 5/2/1 Mbps 802. 11b standard Advanced Power Management supports power saving mode for battery device Auto fallback data rate in the environment of interference 64/128/256 Bits WEP Encryption function High through-put supports multi-media data bandwidth requirement Built-in PCB patch diversity antenna or external antenna support. Product Application Wireless Networking in Enterprise, SOHO and Home environment Wireless Networking Access in Hot Spot area such as Airport, Hotel, School, Convention center, Coffee shop, . . . Mobile media through wireless LAN Mobile networking for notebook PC, and Mobile devices Wireless access to devices such as Printer, Scanner, WebCAM, . . . Build system in Ad-Hoc for Host-Client appliance or Infrastructure mode for multi-access 2 2. General Specifications Standards: IEEE802. 11b Compliant PC Card standard Ver 7. 0 Data Rate: Security: Dimension: 22Mbps / 11Mbps / 5. 5 Mbps / 2Mbps / 1 Mbps auto fallback 64/128/256 bit Wired Equivalent Privacy (WEP) 128 x 54 x 5. 0 mm (Non-detachable card) 2. 2. LED Indicators Power/Status Unlighted: Power Off Red color LED steady On: Power on RF TX/RX Unlighted: no activity Green color LED blinking: TX/RX activity 2. 3. Interface CARD BUS PC Card standard Ver 7. 0 3. RF Specification 3. 1. 1 General Emission Type RF Frequency Direct Sequence Spread Spectrum (DSSS) 2400MHz ­ 2497 MHz ­ Japan Band 2400MHz ­ 2472MHz ­ North America 2400MHz ­ 2483. 5MHz ­ Europe 2446. 5MHz ­ 2483. 5MHz ­ France Operating Channel 11 Channels (US, Canada) 13 Channels (Europe) 14 Channels (Japan) Radio Chipset: Media Access Protocol RFMD CSMA/CA (Collision Avoidance) with ACK 3. 1. 2 Transmitter RF Output Power Frequency Stability Data modulation type Data modulation speed 15 dBm Within + 25 ppm BPSK / QPSK / CCK / PBCC 22/11/5. 5/2/1 Mbps with auto fallback 3 3. 1. 3 Receiver Sensitivity -80 dBm (Typically @25+5) 3. 1. 4 Antenna Type Antenna Type Antenna Gain Built in diversity patch antenna 2 dBi max. 3. 1. 5. Typical Operation Range 22Mbps 11Mbps 5. 5Mbps 2Mbps 1Mbps 100M 150M 250M 300M 350M 3. 2 Hardware Specification 3. 2. 1 MAC controller TI ACX100 3. 2. 2 Memory 8Kbit EEPROM 3. 2. 3 Power Power Voltage Power Consumption 3. 3 or 5 Volt + 5% 650 mA by TX (Max) 350mA by RX 4. Driver NDIS4. 0 LAN driver for Win98 NDIS5. 0 LAN driver for Win2000, Win ME NDIS5. 1 LAN driver for Win XP 4. 2. Configuration Utility Configuration Utility software program for Win98, Win2000, WinME and WinXP. Configurable Parameters Networking Type Channel ESSID Rx Rate TX Rate WEP Infrastructure / Ad-Hoc Description Channel number setting (14 channels available) ESSID setting Current Receiving data rate Current Transmitting rate Disable, 64 bit, 128 bit and 256 bit 4 Link Quality Signal Strength Receiving AP link quality on infrastructure networking mode Receiving AP signal strength on infrastructure networking mode 5. REGULATION COMPLIANCE Compliant with FCC Part 15 Class B and C ETSI EN 300 328-2 and ETSI EN 301 489-1, -17, EN60950, CE-Mark Telec (Japan, Customized) WiFi Compliant 6. Anti-Static Voltage Static voltage tests by 4 kV in card frame should not cause system fail 6. 1. 2. Vibration Test The vibration test is under the frequency and amplitude 10-25 Hz 1mm in vertical and horizontal direction by 30 minutes that should not cause any damage on product. 6. 1. 3. Package Drop Test Dropping the package from the height of 50cm for each of the six(6) faces onto the hard-wood floor should not cause any damage on product. 6. 2. Temperature Range Operating: Storage: -0 - +55 (Except RF output power and sensitivity) -20 - +70 6. 2. 2. Reliability Test One cycle of reliability test is keeping at -30 by 2 hours, switching temperature up to +60 within one hour , and testing at +60 by 2 hours, and switching temperature to -30 within one hour. Three cycle should be tested and without any product fail. 6. 2. 3. Humidity Operating: 0% to 70% 5 Storage 0% to 95% Non-condensing 7. Insert the PC CARD to the slot of computer 3. [. . . ] This equipment generates, uses and can radiate radio frequency energy and, if t not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by during the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. [. . . ]