User manual INTELLINET 521529

[. . . ] Hardware Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. PRODUCT SOFTWARE SPECIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. 1. General Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. 2. Configuration Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5. [. . . ] Windows will automatically start Installshield Wizard or run "E:\22M. exe" then following screen will appear. 6 4. Click "Finish" button to restart computer. 7. 1. 2 Utility Configuration Please Click following icon in the screen. Caution: If you select one or more Access points, then click Apply in following screens. One or more user names and passwords prompt will appear. Type in "admin" as the user name and "admin" as the password. Click Ok. 7 Link inf. The Link inf. You can view the current status and settings. Then, click AP settings. AP Settings The AP setting screen will now appear. Enter a unique name access point for the Access Point and your wireless network's SSID, select the channel at which the network broadband its wireless signal. Then, click Advanced Settings. 8 Advanced Setup On this page, you can set the AP mode plus following settings: Beacon Interval ­ By default, it is set to 100mps. RTS Threshold ­ By default, it is set to 2432. The value should remain on its default setting 2432 bytes. If you encounter any date flow, only minor modifications are recommended. Fragmentation Threshold ­ By default, it is set to 2346. The value indicates how much of the network resources devoted to recovering packet errors. The value should remain at its default setting of 2432 bytes. If you have decreased this value and experience high packet error rates, you can increase it again, but will likely decrease overall network performance. DTIM Interval ­ shows the client how often the beacon contains a delivery traffic indication message. Preamble Type -- There is the "Long" or "Short" selection to ensure that systems receiving the information correctly interpret when the data transmission starts. To select "Short" Preamble may be used to minimize overhead and "Long" to maximize the network data throughput. The default value will be set for "Long". Authentication Type ­ You may select Open System or Shared Key. [. . . ] If you have decreased this value and experience high packet error rates, you can increase it again, but will likely decrease overall network performance. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. [. . . ]