User manual INTELLINET 522342

[. . . ] Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 1 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 2 Benefits and Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 3 Physical Parts and Panel of the SA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select the Disable radio button for none. The branch has to use the same Preshare key. Enter the number of hours in IPsec key Lifetime. In Remote Host Setting: If the branch has a fixed IP address "10. 0. 0. 9". Please select the Fixed IP radio button. 7. The fixed IP address of the branch "10. 0. 0. 9". Then you would go back to the previous IPSec Setting. In Action column, click the link up button to connect immediately, or click the remove button to remove the tunnel. At the branch side: Please repeat the steps above to create the tunnel. Note in step 9, the Remote IP field, enter the fixed IP address of the main company and the corresponding Subnet and Netmask. The Preshare Key field is a secret key that is used to identify communicating host during the phase 1 IKE negotiation. The IPSec Key Lifetime specifies how long the secret key will be exchanged. If zero value is given, it will pick up the default setting. For the Remote Host Setting, you can choose the remote type of the communication as fixed IP gateway or dynamic IP gateway. The IPSec Tunnel List displays information for each tunnel that you build. The Name field is the connection name; the Gateway field is the IP address with which we communicate; the Destination Subnet field specifies the 36 sub-network address with which we communicate; the Status field shows you whether the current link is established or not. If the current link is not established, you can click the Link Up button in the Action field to request the tunnel to be established. If you need to re-configure the setting, the Modify button will help you adjust your settings. When you no longer require the tunnel, click the Remove button and the corresponding entry will be removed from the table. Figure 6. 1a Figure 6. 1b 37 Figure 6. 1c 6. 2 PPTP Settings For most companies, the PPTP server creates a secure connection that a remote user can access a host within the company. The remote user has to run a PPTP client and connect to the PPTP server. The PPTP server has to validate the remote user as being in the User List in section 9. 1. The server certifies the PPTP client with a username and password. [. . . ] Lastly, enter the Account name and password. This name is the same one as on your appliance. In this case, user name is `teacher' and password is: ****. Click on the `Finish' and you are ready to send and receive e-mail! 73 NOTE: Passwords are highly suggested for all e-mail account users to protect your e-mails and to prevent people from unauthorized use of your e-mail server. 13 USB Printer Server (Some Models) Step 1: Installing a shared network printer (Windows only) (a) Please make sure the hard disk is initialized (the status is READY) (b) Plug in a USB PRINTER to the USB port on the Unit. [. . . ]