User manual INTELLINET 550703

[. . . ] Wireless Network IP Camera PROFESSIONAL SERIES Model 550703 User's Guide LV2. 0 WIRELESS NETWORK IP CAMERA User's Guide FCC Compliance Statement The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. [. . . ] Also, the Motion Detection only works reliably at a maximum image resolution of 320x240. CAUTION: Do not use the motion detection function for security monitoring of high value items. When using motion detection for security, the use of an external sensor, such as infrared, is recommended. The "from" and "to" values specify the time window in which the motion detection is active. . Example: From 8 to 19 would activate the motion detection between 8 o'clock in the morning and 7 o'clock in the evening. The Wireless Network IP Camera itself is to be triggered automatically by a programmable setting. Motion detection sensitivity This is to configure the level of motion detection sensitivity. The level is composed of 10 settings from 0 to 9. The higher the setting, the greater the sensitivity. In case of level 9 for sensitivity, the camera may detect a tiny motion, even light changes. It is strongly recommended to configure levels 3 - 6 for sensitivity. Image Capture Option This is to configure image capture before and/or after an event is triggered. Before event You may set the starting time to capture the image before an event is triggered. (Input limitation is from 0 to 21 seconds. ) After event You may set the finishing time to capture the image after an event is triggered. (Input limitation is from 0 to 21 seconds. ) Image capture frame rate Set the frame rate from 1 to 15 fps when the image is being captured. Image file name You may designate an image file name to send via e-mail or FTP after an image is captured. All captured images are saved as JPG files. "File name 000". JPG) 44 WIRELESS NETWORK IP CAMERA User's Guide Append to the image file name You may append some information to the Image file name A. Camera IP address : Example: "file name _192. 168. 1. 19". JPG B. Date and time : Example: "file name_20020218150030. "JPG C. If choosing "Activation of digital input port", "D" may be appended to image file name. Example: "file name_D. "JPG In case of choosing "Periodically every. . . ", "P" is appended to image file name. [. . . ] The wide-area-networking protocol that makes the Internet work. TCP/IP is used on many networks, including the Internet. TCP keeps track of the individual packets of information and IP contains the rules for how the packets are actually sent and received. URL (Uniform Resource Locator) ­ An "address" on the network. [. . . ]