Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual INTERMATIC 158DT11724. We hope that this INTERMATIC 158DT11724 user guide will be useful to you.
Lastmanuals help download the user guide INTERMATIC 158DT11724.
Detailed instructions for use are in the User's Guide.
[. . . ] Replacing Batteries -The battery indicator on the display will show when the batteries are running down (See Fig. To replace the batteries: -Place the flat end of a screwdriver under one of the holder slots and carefully pry the cover up. -Remove the two batteries and replace with fresh LR44 batteries. Follow the placing of the batteries as shown in the battery holder (See Fig. [. . . ] Once the tab is removed the readout will flash 12:00 AM and look like Fig. For your convenience the DT27 may be set while it is unplugged from the wall outlet. If not plugged in, the timer display will go blank after a few minutes with no pushbutton activity. If this happens, simply push any button once to turn on the display, then resume setting the timer. When programming is complete, you may connect the device to the timer and plug the timer into your wall outlet. PLEASE READ BEFORE SETTING THE DATE OR CLOCK: 1. Before setting your timer for the first time, clear the memory by momentarily pressing RESET while holding ENTER/NEXT button down (See Fig. Press the MODE + button to step through the various programming and operating modes. If you wish to skip a programming step such as SUNUP and SUNSET settings, press the MODE + button to pass any section of the program. When you complete a step in setting the DATE or each FIXED EVENT times, Fig. By pressing and holding any button, the display will advance rapidly. In order for the Astronomic Feature and automatic DST settings to function properly, the DATE settings must be entered correctly. In the event that the batteries are allowed to run down, or are removed for more than 15 seconds, the timer will maintain the year, month, day and all prior programming settings. If the batteries are replaced on the same day, only the time of day would have to be reset. Quick instructions are located on the label inside timer door. Setting the DATE -Press the MODE + button. Press the SET + or - to get the correct month (See Fig. 5). Press SET + or - to get to the correct day. Press SET + or - to get to the correct year. Press MODE + to go to the time setting mode. 4 (NOTE: The day of the week is automatically determined and is shown at the bottom of the display).
SET DATE
Setting ASTRO -See Fig. 8 to determine whether you live in NORTH, CENTER OR SOUTH ZONE. --Using the SET + button set the zone in which you live. [. . . ] REPEAT IF YOU DO NOT WANT TO USE SUNUP ASTRO. -You can now set EVENT 1, which is your first ON setting. Press DAY to set the day(s) that the settings will be used (Same as in Programming ON/OFF Times with ASTRO. Using SET + or - set the time you would like your device to be turned on. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC 158DT11724
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC 158DT11724 will begin.
