User manual INTERMATIC 158EI12085

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual INTERMATIC 158EI12085. We hope that this INTERMATIC 158EI12085 user guide will be useful to you.

Lastmanuals help download the user guide INTERMATIC 158EI12085.


Mode d'emploi INTERMATIC 158EI12085
Download
Manual abstract: user guide INTERMATIC 158EI12085

Detailed instructions for use are in the User's Guide.

[. . . ] INTERMATIC EI200 ELECTRONIC IN-WALL COUNTDOWN TIMER FEATURES: · 5-10-15-30 - Minute time ranges. · Continuous HOLD "ON" feature. [. . . ] Cut white wire in junction box (or open splice) and striP 1/2" of insulation on both wires. Connect white timer wire to white wires in junction WIRE FROM FIXTURE box using wire connector. If the wall switch you are replacing had separate grounding conductors connected to the GREEN screw on the switch, make sure to connect these to the green wire from the timer with a wire connector. Check that all wire connections are secure. Next, install timer using (2) mounting screws furnished. Reconnect your electrical power. FIGURE 2 OPERATIONS Timer Mode To enter timer mode, press and release the push button (for less than 2 seconds) repeatedly to select one of the four time settings or OFF ( 5 minutes - 10 minutes - 15 minutes - 30 minutes - OFF). The illuminated LED indicates which time setting is selected and the connected load is turned ON. Timer starts counting down until time out is reached, all 5 LED's go off and the connected load turns OFF. FIGURE 1 (WHITE) HOT Hold Mode (Continuous Operation) To turn timer ON for extended periods of time, press and hold the push button for more than 2 seconds. Timer enters HOLD mode, HOLD LED turns on, and the connected load is turned ON. To exit HOLD mode press and release the push button, all 5 LED's go off and the connected load turns OFF. LIMITED 1 YEAR WARRANTY If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. [. . . ] This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along with proof of purchase, postage prepaid to the authorized service center listed below. This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd. , Spring Grove, Illinois 60081-9698/815-675-7000 http://www. intermatic. com Please be sure to wrap the product securely to avoid shipping damage. INTERMATIC INCORPORATED SPRING GROVE, ILLINOIS 60081-9698 158EI12085 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC 158EI12085

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC 158EI12085 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag