User manual INTERMATIC 158WF12659REF

[. . . ] Turn the valve on the pump in a vertical position for minimum water flow. GENERAL INSTRUCTIONS FOR WATERFALL USE (6) SCREWS WF306 CAP (6) PCS NUT (2) PCS PANEL A CAUTION: This pump has been evaluated for use with water only. NOTE: It is recommended the pump be set at its highest flow during assembly and later adjusted to a lower setting if desired. Be sure to unplug pump before adjusting flow setting. SLATE WARNING: RISK OF ELECTRICAL SHOCK PANEL B WARNING: RISK OF FIRE WATERFALL ASSEMBLY 1. 6. · Do not connect to any voltage other than that shown on the pump. [. . . ] Using the brackets and screws attach Panel A to the top of the copper tubing. Attach middle Panel B to the back of top slate piece using screws and nuts, tighten. Attach Panel C to the back of middle slate using the screws and nuts, tighten. Connect the pump and connect the power cord to the AC adapter DO NOT plug into outlet at this time. Once assembled, place the waterfall lid in base of waterfall. WARNING: NOTE: Do not let pump run when NOT submerged in water. Always submerge the pump in water first, and then plug in the unit. Place hook or nail (not included) or choose an attachment mechanism appropriate for your wall in wall and secure fountain by placing hook or nail in chain. Please ensure that product is assembled according to the directions provided in this information packet. Doing these things will increase safety measures and avoid tipping of the waterfall. 14. Fill base with distilled water to approximately 1/2" above pump. Tap water will create mineral deposits that will result in the corruption of the Waterfall and pump. Plug adapter into 120V household outlet. (The waterfall is controlled by the switch on the power cord. ) If pump doesn't operate, rotate in-line switch once to turn to "off" and once to turn to "on. " NOTE: Ensure that the electrical cord loop is below the electrical outlet. " This will prevent water from running down the cord into the electrical outlet. WARNING: This is not a toy. To avoid danger of choking keep small river rocks away from Children and Pets. 1. Ensure water pump is kept clean and free of debris. We recommend using distilled water with this product. NOTE: To clean pump, first make sure pump is UNPLUGGED from 120V circuit and remove front plate. Check for and remove dirt and debris from impeller. Reassemble. MAINTAINING CLEANLINESS AND LIFE OF WATERFALL & PUMP Impeller Holder Motorhead 2. [. . . ] INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. [. . . ]