User manual INTERMATIC SS7C

[. . . ] Controls and Displays Cover/Switch The clear cover/switch is the manual ON/OFF control. Pull at notch at top edge to remove cover so you can use the programming buttons. Click in the top. MAN AM AM MO ON MODEL SS7 SERIES INSTALLATION AND OPERATING INSTRUCTIONS Features · Automatic or manual operation. Push the clear cover/switch to switch On or Off at any time. [. . . ] Press any button to clear the `lobAt' message. The timer has built-in memory protection providing at least 15 seconds to change a weak battery without losing your settings. You do not need to turn off the load or the power in order to replace the battery, however, do not attempt to switch the timer on or off while the battery is out or your settings will be lost and the timer will need to be reset. Function depends on the mode: CLK mode - ON/OFF EVENT button does nothing. PGM mode - Switches in order through the 12 programmable events 1 ON, 1 OFF, 2 ON, 2 OFF, 3 ON, 3 OFF, 4 ON, 4 OFF, 5 ON, 5 OFF, 6 ON, and 6 OFF. AUTO mode - Manually turns switch on or off. AUTO RAND mode - Manually turns switch on or off. MAN mode - Manually turns switch on or off. How to set or change the clock 1. Push and release MODE button until CLK is displayed (2a). Push and release DAY button until correct day of week is displayed (3a). Push and release H+ button until hour and AM/PM are correct (4a). Push and release M+ button until minutes are correct (5a). Push and release MODE button to choose AUTO, AUTO RAND or MAN. Push and release clear cover/switch to switch load ON or OFF if necessary. 2a CLK 4a 3a 2, 6 3 4 PM WE ON 5a ON/OFF EVENT MODE RESET DAY H+ M+ Programming and Operating Instructions Introduction to Operation and Programming: The timer is a programmable switch. At any time you can push the clear cover/switch to manually turn the switch ON or OFF, unless selected mode is CLK or PGM. You can program up to 12 ON/OFF EVENTS; times when the timer automatically switches the connected lights (or other electrical devices) ON or OFF (up to 6 ON events and 6 OFF events). An EVENT can be set to switch at: · any specific time, and day of the week, · a specific time every day, · a specific time on weekdays, or · a specific time on weekends. See Installation Instructions first if your timer is not already installed, or if the AA Alkaline battery is not installed. 5 How to set, change, or review ON/OFF times 1. Push and release MODE button until PGM is displayed (2a). If necessary, push and release ON/OFF/EVENT button until event to set/change is displayed (3a), or push the ON/OFF/EVENT pushbutton repeatedly to review all the ON/OFF times. Push and release DAY button until desired day or group of days is displayed (4a), or push and release the DAY button until "-:--" is displayed, if you would like to cancel this ON or OFF time. Push and release H+ button until desired event hour and AM/PM are displayed (5a). Push and release M+ button until desired minutes are displayed (6a). [. . . ] Push in battery cover until you hear a click. Push reset button to clear display and reprogram the unit. Replace device if NoOp will not clear from display. Make sure timer display shows `ON' then check dimmer operation at full brightness setting. [. . . ]