User manual INVICTA INVICTA

[. . . ] InstructIon Manual and Warranty thank you for choosing an invicTa TiMepiece Long ago, we set out to continue Invicta's original 1837 mission ­ to offer magnificent Swiss timepieces at modest prices. In doing so, we gave birth to a movement in the watch industry that is turning the balance of power over to the consumer. we hope you enjoy your new timepiece and carefully read the easy-to-use instructions pertaining to it. By doing so, you will help give it a long life and keep it operating at the high quality standards by which it was crafted. [. . . ] Start/Stop/reset Before using the chronograph functions, please ensure that the crown is in position 0 and the 4 chronograph hands are precisely at zero position following activation of push-button B. Should this not be the case, the positions of the hands must be adjusted. Stop: press push-button a again and read the three chronograph hands. The chronograph hands will be reset to their zero positions. chronographs adjusting the Chronograph Hands to Zero Position . Turn the crown until you reach the correct date. chronographs Setting the date . To set the time to the exact second, it must be pushed back into position 0 at the exact second. if you are setting the date between 9pm and 12pm, the date must be set to the following day. 0 chronographs wiTh BIG date anD day Invicta is one of the first companies to use the Swiss-made Startech 5050. C, the world's first big date and day chronograph with three eyes. It features small seconds at 3 o'clock, tenths of a second at 6 o'clock, and 30 minutes and, in some, 12 hours at 9 o'clock. display Elements Day Second hand Minute hand Hour hand Hour counter Minute counter Center stop - second 1/10 sec counter Big date chronographs wiTh BIG date anD day Control Buttons Push Button A 0 1 2 Crown Push Button B chronographs wiTh BIG date anD day Setting the time, day and date . Turn the crown until you reach the correct date. if you change the date between 9:00pm and 12:00pm, it must be set to the following day as dates set between these hours do not automatically change at midnight. Turn the crown clockwise until you reach the correct time. Turn the crown counterclockwise until you reach the correct day. The watch will begin running again. chronographs wiTh BIG date anD day Basic Function . Start/Stop/reset Before using the chronograph functions, please ensure that the crown is in position 0 and the 4 chronograph hands are precisely at zero position following activation of push-button B. Should this not be the case, the positions of the hands must be adjusted. Stop: press push-button a again and read the 3 chronograph counters. The three chronograph hands will be reset to their zero positions. chronographs wiTh BIG date anD day adjusting the Chronograph Hands to Zero Position Before using the chronograph functions, please ensure that the crown is in position 0 and the 4 chronograph hands are precisely at zero position following activation of push-button B. Should this not be the case, the positions of the hands must be adjusted. all three chronograph hands are in their correct or incorrect zero position. Keep push-button A and B depressed simultaneously for at least 2 seconds. [. . . ] experience shows that the first testing phase is sufficient for most watches. however, some watches need a little special attention. should your watch be among those few, please understand that we are only concerned with the performance of your watch once you receive it back. we ask for both your understanding and patience in this case. [. . . ]