User manual IOGEAR GBC201

[. . . ] BluetoothTM CompactFlash Card User Manual (GBC201) Thank you for purchasing IOGEAR Bluetooth CompactFlash card for PDAs!The IOGEAR Bluetooth Compact Flash Card for PDAs fits into both Type I and Type II CF slots on your PDA, and makes your PDA Bluetooth enabled. Connect your Bluetooth ready PDA and other Bluetooth devices and enjoy the freedom and flexibility of wireless information sharing. You can print, transfer files, synchronize data, and share Internet access, without cables. [. . . ] Click Yes to install the software into the default directory on the PDA 10 Installation 7. Copying the necessary files onto the PDA may take a few minutes. Click on Finish to complete the installation on your PC. 8. Click on OK. 11 Installation 10. After the installation has been completed, computer, the software will be a dialogue box will appear and confirm immediately installed and configured. Read Otherwise, the software will be the instructions on the screen and make installed the next time, the PDA sure to check Add a shortcut in the Start synchronizes with the computer using menu. Tap on OK in the upper-right MS ActiveSync. Note: Please refer to the PDA manufacturer's manual regarding the "factory reset" of the PDA. Turning the PDA "On" and "Off" does not reset the PDA. Insert the BluetoothTM Compact Flash Card into the compact flash slot on your PDA Congratulations!The IOGEAR Bluetooth Manager has been successfully installed on your PDA. 13 Configuring and Setting Your IOGEAR BluetoothTM CompactFlash Card Before using your newly installed IOGEAR BluetoothTM CompactFlash Card, make sure that your BluetoothTM CompactFlash Card is configured properly. NOTE: The default settings should work with your current BluetoothTM setup and only need to be changed if there is a conflict between BluetoothTM devices. 14 Configuration 1. Double-tap on the BluetoothTM icon in the 2. lower-left corner to access the configurations and settings menus. The General BluetoothTM tab shows the current profile and status of your BluetoothTM CompactFlash card. Doubletapping the BluetoothTM Manager link will allow you to set the connections (refer to next topic: Connecting Your IOGEAR BluetoothTM CompactFlash Card To Other Bluetooth Devices). 15 Configuration 3. change the device's name and allow other BluetoothTM devices to connect to your BluetoothTM -enabled PDA. Checking the option of Other devices can discover me allows other BluetoothTM devices to see and pair to this PDA. The File Transfer tab allows you to set the security level of file transfer service and specify the folder for sharing. In the following sample, "My Document\Business" folder is shared and allow access by other devices. You are able to set various security levels such as requiring authorization and requiring authorization with passkey. 16 Configuration 5. you to set the security level of the information exchange service and you can also specify the vCard (If a vCard business card has already been setup) to be used. The Serial Port tab allows you to set the security level of the serial port service. [. . . ] The Pass Key authentication is perpetuated in Pairing, meaning that devices will not ask for a Pass Key once they are paired. Paired devices will remain linked, even if other paired devices are turned off. Once a paired device turns back on, it is ready to be used and service requests will not ask for the Pass Key again. The Built-in 128 bit security encryption of BluetoothTM assures the privacy of your paired devices. [. . . ]