User manual IOGEAR GHE225U

[. . . ] 2. 5" USB 2. 0 IONTM Drive Hi-Speed Portable External Hard Drive User Manual ® Thank you for purchasing IOGEAR's® IONTM Drive, one of the fastest and slimmest Hi-Speed portable external Hard Drives on the market. IOGEAR® only manufactures high quality storage devices, so we are sure you will be satisfied with your purchase. IOGEAR® is dedicated to customer service and satisfaction, and wishes you the best with your new IONTM drive. To better serve you, IOGEAR® offers an array of additional USB 2. 0, USB, FireWire, KVM, and other peripheral products. [. . . ] For assistance with your hard drive, please contact your IOGEAR Service Support representative. Please take all proper Electro Static Discharge (ESD) precautions during the installation of your new hardware. For further information on ESD please visit http://www. esda. org. Step 1. Before you begin, please have a Phillips head screw driver available. Unscrew the buttom two screws of the IONTM Drive. 11 Installation of Hard Drive Step 3. Gently pull the bottom end cap out of the main body of the IONTM Drive. 12 Installation of Hard Drive Step 4. Slide your 2. 5" HDD into the bottom of the IONTM Drive "label side up, " "with hard drive connector pins pointing to the top of the drive. " 13 Installation of Hard Drive Step 5. Line up the Drive evenly into the inside of the inclosure. Gently (DO NOT FORCE) push the bottom of HDD into the top of the enclosure. 14 Installation of Hard Drive Step 7. To complete the installation, simply replace the bottom top screws. 15 IONTM Drive Setup Hi-Speed USB 2. 0 Installation Note: Before you begin, please make sure that the power to the device and your computer has been turned off. For Windows® 98SE users, Insert the IOGEAR® Installation CD into your computer's CD-ROM tray before you begin. (It is not necessary to install a driver under Windows® 2000, ME, XP) Please refer to page 14 after completing the instructions on pages 12 and 13. Mac OS users refer to pages 20- Step 1. Plug the USB Type mini-B connector into the back of the IONTM Drive. 16 IONTM Drive Setup Hi-Speed USB 2. 0 Installation Cont. Step 2. Plug the USB Type A connector into your computer's USB 2. 0 Port. Once complete, turn the IONTM Drive and your computer on. Your computer will automatically identify the IONTM Drive and load all necessary drivers. 17 Installation of IONTM Drive Software (PC) For Windows® 98SE Users Only Step 1. Once the IONTM Drive has been plugged in, Step 2. In the next window, please select "Search for the following window should appear. (If the the best driver for this device" and click Next drive automatically loads you will not need to to continue. continue. ) Click Next to continue. 18 Installation of IONTM Drive Software (PC) Step 3. The next window will allow you to point the driver search to a specific folder. [. . . ] Please be ready to give a brief description of the problem, and what you were doing when the problem occurred, before calling Service Support. The Service Support representative will be able to serve you much quicker if you are prepared to answer the following questions listed below. If so, what are the steps necessary to reproduce the problem When does the problem occur?What have you already tried to get the problem resolved? [. . . ]