User manual IOGEAR GKM531R

[. . . ] Keyboard/ Wireless RF Keyboard/ Optical Mouse Combo User Manual (GKM531R) ® ® ©2006 IOGEAR. M0391 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. [. . . ] Press the Connect button on the USB receiver; the connect LED will light up green. Press and hold the connect button, located on the bottom of the mouse, for a few seconds 4. Move the mouse around and make sure that it is functioning properly. If the mouse does not work, please repeat the procedure again. CONNECT THE KEYBOARD 1. Press the Connect button on the USB receiver; the connect LED will light up green 2. Press and hold the connect button, located on the bottom of the keyboard, for a few seconds 3. Tap the keys on the keyboard or type something to verify that it is working properly. If it doesn't work, please repeat the procedure again Note: If your system has any problems detecting the wireless keyboard and mouse, please turn off your computer before following the steps above. With your computer turned off, connect the USB receiver to an available USB port, and then power on your computer. Upon boot-up, the system should detect the wireless keyboard/mouse combo, and install all necessary drivers automatically. 15 Hardware Installation 3. Install the wireless combo on a brand new computer system - Before you turn on the system, make sure the batteries are installed for both keyboard and mouse and mouse batteries have been charged for at least two hours; - Plug the USB charging station/receiver into an available USB port on your computer - Power ON your computer - Upon boot-up, your Operating System should detect the IOGEAR wireless keyboard/mouse combo and install any drivers, if necessary. - Press the connect button on the USB Receiver - Press the connect button located on the bottom of the mouse for a few seconds - Move the mouse and make sure it is working properly - Press the connect button on the USB Receiver - Press the connect button located on the bottom of the keyboard for a few seconds - Your IOGEAR Wireless Keyboard/Mouse Combo should now work wirelessly. If not, repeat the steps above again. 16 Software Installation Note: There is no software for MAC Operating System; multimedia/functions keys are not supported on MAC platform. Windows 98SE/ME/2000/XP 1. Insert the utility software CD into the computer 2. The installation will Auto-start and prompt you to install the Keyboard and Mouse drivers. Please make sure both boxes are checked and click Install. 3. Select your desired language and click Next. 17 Software Installation 4. On the Welcome screen, click Next to proceed with the driver installation 5. For the mouse type, please select 5 Button Mouse and then click Next. 18 Software Installation 6. Select the destination directory for installation and then click Next. Enter a program folder name and click Next. 19 Software Installation 8. To start copying the installation files, please press Next. [. . . ] Go to the Installation directory of the Keyboard drivers and launch the executable application located there 2. Alternatively, you may just restart the computer and the software will launch on the background automatically upon boot-up. 33 FAQs and Troubleshooting Q1. When I press the Multimedia keys Volume Up/Down/Mute, nothing happens. Some of the multimedia keys will not work until you install the keyboard drivers included on the installation CD. [. . . ]