User manual IOGEAR GPSU21

[. . . ] The built-in web management feature provides more convenience by allowing the user to configure, monitor and even reset the print server via a web browser. This eliminates the need to place the printer right next to the computer. Print jobs can be sent to a printer in another country just as easily as to a printer in the same office. Why bother sending a degraded fax image while you can print an original at the destination? [. . . ] Click Next and skip to step 7 if you do not need to specify an IP address, otherwise select the option to change settings (no password is needed by default) and then click Next. 11 Software Installation - Windows 5. Here you can specify the network settings the print server will use. If you will be printing from the internet, it is important that the Gateway IP Address is set to the IP of your router. Review the settings you have entered carefully and click Next to confirm that they are correct and save them to the print server. 12 Software Installation - Windows 7. All existing printers installed on your computer will show up in this list. Select the model that is now attached to the print server and click Next to continue. If the printer you are setting up does not show up in the list, click Add New Printer and install your printer's drivers as needed. If asked which port to use, choose LPT1 but do NOT print a test page yet. The printer will be changed to the correct port in the next step. 13 Software Installation - Windows 8. If you get the following message, the print 9. A summary screen will show the name server's IP settings are not set up correctly of the printer to be modified and the IP of for your network. Click Back until you see the print server which will be used. If this the screen in step 4, then change the print information is correct click Next. You may use DHCP to set them automatically if the print server is connected to a router. 14 Software Installation - Windows 10. Setup of your print server is now complete. Click Finish to close the wizard. 15 Software Installation - Mac Software Installation - Mac 1. No software from the Setup CD is needed on Macintosh systems. Simply open the Print and Fax settings from your System Preferences window. Click the plus (+) button to setup a new printer. At the top of the Printer Browser, click the icon for IP printer. 16 Software Installation - Mac 3. Select the LPD protocol, then type in the IP address of the print server. Type "lp1" with lowercase letters for the name of the Queue. [. . . ] Click Finish to complete the wizard and begin printing to your home or office printer from anywhere in the world. 20 Technical Support If you need technical support, please check out our IOGEAR Tech Info Library (TIL) at http:// www. iogear. com/support for the latest tips, tricks, and troubleshooting. The TIL is designed to provide you with the latest technical information about our products. Most of the answers to your questions can be found here, so please try it out before contacting technical support. Technical support is available Monday through Friday from 8:00 am to 5:00 pm PST by calling our toll-free number 866-9-IOGEAR (866-946-4327). [. . . ]