User manual IOMEGA CD-RW 52X24X52 USB

[. . . ] Please read these safety instructions carefully. Please keep this User's Manual for your reference. Please disconnect the equipment from your AC outlet before cleaning. Do not use liquid or sprayed detergent for cleaning. [. . . ] In case the Eject button isn't working, insert a small stick or paper clip into this hole to eject the tray. Note: Turn off the power before doing this manual ejection. 7 ENGLISH Rear View Figure: Rear view of DVD Writer A Power Connector B USB Connector Five-pin connector for DC power input. Standard USB B type jack. 8 ENGLISH USB 2. 0 USERS USB 2. 0 is a very new technology. Therefore, most computers do not have native support for USB 2. 0. You must install a USB 2. 0 adapter card for your External drive to run at USB 2. 0 speeds. If you do not have a USB 2. 0 card installed, this drive will still work connected to a standard USB 1. 1 connection, but the speed will be limited to USB 1. 1 speed. After installing a USB 2. 0 adapter card, follow the steps below for your operating system to verify the USB 2. 0 card is installed properly. Windows® 98SE/ME users: Right click My Computer and select Properties. Wait for the operating system to load, then insert the CD kit. Follow the instructions on the screen to install the software for Recording CDs, DVDs or Playing DVDs you wish to install from the CD kit. (To prevent damage to the power plug, connect carefully to avoid bending the power plug. ) Attach the included Hi-Speed USB cable B type plug to the drive. (Examine the connection carefully for the correct orientation. ) Connect the A type plug end of the Hi-Speed USB cable to the USB 2. 0 adapter card connection on your computer. (NOTE: If you cannot identify the USB 2. 0 connection, refer to the documentation of your USB 2. 0 card. If you do not have a USB 2. 0 adapter card installed, you can still connect the drive to a standard USB 1. 1 connection. ) Special notes for Windows 98SE user. If this is the first time you are installing this USB drive to your Windows 98SE (Second Edition) Operating System, you will have to install a USB driver for your Windows 98SE. Follow the instructions on the screen to install the USB driver properly, then restart your computer. (For more details, please refer to the USB 2. 0 Users page. ) 2. 3. 4. 5. (Optional) Audio Cable Connection for Audio CD Playback 1. 2. Connect the included audio cable to the drive. (NOTE: Ensure the computer and the drive are off before connecting the audio to your computer. ) Connect the audio cable to the "Audio In" connector of your computer. (NOTE: Only connect the audio cable to powered speakers or to headphones with volume control function. ) 11 ENGLISH OPERATION Installing Necessary Device Drivers In Windows, the DVD Writer acts as a "CD-ROM Drive" for purpose of installation and setup. In some cases, you will need to install additional software to make use of all the features of the DVD Writer. To use the DVD Writer on a computer: As a CD-ROM drive: Most Windows Operating Systems (Windows XP, Windows ME, Windows 2000, Windows 98, and Windows 95) supply a generic CD-ROM device driver that allows the DVD Writer to function as a standard CDROM drive. You do not need to install anything else. As a DVD-ROM drive: The computer's operating system (excluding Windows 95) also allows the DVD Writer to function as a DVD-ROM drive. [. . . ] Quit other applications other than the authoring software. Due to shortage of main memory in PC, swapping of hard disc space may have occurred. If swapped, data from the hard disc may cut off causing buffer underruns. "Auto thermal recalibration" triggered. [. . . ]