User manual IOMEGA STORCENTER PRO NAS 250D 1.5TB MICROSOFT WINDOWS STORAGE SERVER 2003 R2 WITH PRINT SERVER

[. . . ] L Use an Uninterruptible Power Supply (UPS) To protect your StorCenter Pro against power loss and/or power surges, an external UPS device is recommended. L Have a spare StorCenter Pro hot-swappable hard drive available The StorCenter Pro has been designed to allow a single hard drive to be replaced during normal operation. As a result, Iomega recommends that you have a spare hard drive available in the event of a hard drive failure. This will permit a faster return to normal performance speeds. [. . . ] replacing the OS Drive Your Iomega StorCenter Pro has an Operating System (OS) that resides on the first drive. In addition, a mirrored copy of the OS has been created on the second drive. Your StorCenter Pro has been configured (RAID 1) so that you can lose any single drive, including an OS drive, and the system will remain operational. In the event of failure of an OS drive, you do not need to shut down your system. Simply remove the failed drive from the system and wait for the system to indicate a successful removal. And wait for the system to restore the OS as well as any RAID volumes that were configured on the original drive. It is very important that the system is NOT shutdown and that no other drives are removed until this restoration is complete. Failure to follow these steps could result in system failure and loss of data!For more information on all of the above items, please refer to the user's manual located on the Solutions CD. recovering the StorCenter Pro from the Recovery DVD CAUTION!This utility will restore the StorCenter Pro to its original factory state. Make sure your data is backed up before proceeding. Insert the StorCenter Pro Recovery disc into the DVD drive and boot the StorCenter Pro from the recovery DVD. Allow the StorCenter Pro to finish the automated rebuild process. The StorCenter Pro will restart several times during this process. Enabling eTrust The StorCenter Pro ships with a full version of Computer Associates eTrust Antivirus software preinstalled; however, the software is disabled by default. As with other third-party applications, enabling eTrust may degrade system performance. Log into the StorCenter Pro as an administrator using Terminal Services. Installing Service Packs may impact the performance of the StorCenter Pro and may prevent the StorCenter Pro from starting up. We recommend that each Critical Update and Security Patch be evaluated on a case-by-case basis as needed for your network environment. [. . . ] Using Remote Desktop Connection Microsoft Remote Desktop Connection (also known as Terminal Services) allows you to log onto and configure your Iomega StorCenter Pro. Remote Desktop Connection allows you to log into the StorCenter Pro as if you were actually sitting at the keyboard. There are two ways to use Terminal Services: · use the web-based administration tool. When you manage your StorCenter Pro via the Iomega Discovery Tool Pro software, you will be connected to the Web-based administration tool. [. . . ]