User manual IOMEGA ULTRAMAX PRO QUICK GUIDE

[. . . ] Connect the other end of the cable to your eSATA PCI card or built-in eSATA connection. Turn on the power switch on the back of the drive and restart your computer. If the drive does not appear on your computer, refer to Troubleshooting (page 16). Connect the included power supply to the back of the drive and to a power outlet. [. . . ] Make sure the drive is receiving power (check if the status light is on). Make sure you are using the cable that came with your drive. Make sure the drive is connected to only one interface. If you are using the drive on a Windows PC and the drive is not recognized, reformat the drive to either NTFS or FAT32. If the Wizard does not open, locate the drive in the lower list. Look for a disk that does not show a drive letter or file system. Leave the maximum disk space selected and click Next. Assign the next drive letter available and click Next. To format the drive with an NTFS file system, click Next, then click Finish. The drive will be ready to use when the format completes. NOTE: If you want to use the drive with other operating systems, use the Iomega FAT32 Formatter located on the CD to change the format to FAT32 (needed for cross-platform compatibility). If you need detailed instructions, check the Support and Downloads area on www. If your PC will not start up when the drive is connected, there is probably a conflict with the computer. To work around this problem, power off the drive when starting the computer. Power on the drive after the computer finishes starting up. A complete user's manual in HTML format is available on the Support & Downloads area on www. Iomega warrants this hardware product to be free from defects in materials and workmanship for the warranty period. This non-transferable, limited warranty is only to you, the first end-user purchaser. The warranty begins on the date of purchase and lasts for a period of one (1) year for product purchased in the Americas, the Asia-Pacific region, or non-European Union nations in Europe, the Middle East, or Africa; ninety (90) days for Iomega reconditioned products purchased in these regions; or, two (2) years for product purchased by an end-user in member nations of the European Union. This warranty does not apply to: (a) Iomega software products; (b) expendable components such as fuses or bulbs; or (c) third party products, hardware or software, supplied with the warranted product. Iomega makes no warranty of any kind on such products which, if included, are provided "AS IS. " This warranty also excludes damage caused by accident , misuse , abuse , use of non-Iomega approved media , exposure of media to excessive magnetic fields , or external environmental causes. [. . . ] Any implied warranty required by applicable law shall be limited in duration to the express warranty term. Some jurisdictions do not allow disclaimers of implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from jurisdiction to jurisdiction. Any suit for breach of any warranty on your Product must be filed within one (1) year of the first date the suit could have been brought. [. . . ]