User manual ION CD DIRECT

[. . . ] CD DIRECT QUICKSTART GUIDE ENGLISH ( 3 - 9 ) GUÍA DE INICIO RÁPIDO ESPAÑOL ( 10 – 17 ) GUIDE D'UTILISATION RAPIDE FRANÇAIS ( 18 - 24 ) GUIDA RAPIDA ITALIANO ( 25 - 31 ) KURZANLEITUNG DEUTSCH ( 32 – 38 ) SNELSTARTGIDS NEDERLANDS (39 - 45 ) QUICKSTART GUIDE (ENGLISH) BOX CONTENTS Make sure that the items listed below are included in the box: • CD DIRECT • EZ Vinyl Software Disc • Software Quickstart Guide • USB Cable • Quickstart Guide • Safety Instructions & Warranty Information Booklet ATTENTION: Before using the turntable, loosen the "transport screw" (at the far end of the platter, near the tonearm) by turning it CLOCKWISE. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT INTRODUCTION CD DIRECT easily converts your treasured vinyl records and external audio sources to CD. CD DIRECT can also connect to a computer through its USB port. We have included two software packages to aid you in converting your vinyl recordings. [. . . ] € You can not create recording tracks shorter than 10 seconds. € Once you have recorded on a CD-R disc, the data cannot be erased. € A recorded CD-R can be played back in a regular CD player only after finalizing. • To add more recordings to a finalized CD-RW , unfinalize it. € When all available space on a CD-RW has been recorded, you can record additional tracks by erasing previously recorded tracks. Note that you can only erase all tracks or the last track. € If the STOP button or PLAY/PAUSE button is pressed within 10 seconds from the beginning of recording, the unit will not stop recording. € When the recording is finished, “REC” and “- ENd –“ blink for a few seconds, and the unit then goes into stop mode. Do not apply any shock or vibration to the unit during blinking. € If the disc reaches the end during recording, the unit will automatically finalize the disc. € If the disc reaches the end of the 99th track during recording, the unit will finalize the disc automatically. € The recording time of a track may differ slightly from the original source. • When a partially recorded disc is inserted , recording will begin after the last recorded track. € The AUTO REC function automatically separates tracks when it detects the volume level (in dB) set by the MANUAL/AUTO button. When using this function, your CD may have more or fewer tracks than its source due to unexpected quiet or noisy parts, which may trigger -- or not trigger -- the automatic track separation in unexpected ways. If this occurs, use the MANUAL/AUTO button to adjust the volume level appropriately. € When the disc which was recorded by this unit is played back by some other players, a small noise may be heard at the point that the track is divided. 6 RECORDING Recording audio from the turntable or AUX sources on the CD recorder: 1. Press the PHONO/AUX/USB button repeatedly to select which source is to be recorded, either PHONO or AUX. Press the OPEN/CLOSE s button and place a recordable CD-R or CD-RW disc into the disc tray with the printed label side up, and then press the OPEN/CLOSE s button to close the disc tray. Note: Make sure “NO TOC” and “CD-R” (or “CD-RW“) indicators lights on the display, or the RECORD button will not work. Select the mode of track number assignment using the MANUAL/AUTO REC button. [. . . ] during finalizing , no buttons will work. NOTE: Never turn the power off or unplug the power cord when in operation. € Although finalized CD-R discs may play on ordinary CD players, remember that finalized CD-RW discs may not play on ordinary CD players. € The time for the finalizing varies with the type of the disc. [. . . ]