User manual IRIVER H140

[. . . ] Instruction Manual PORTABLE STORAGE DEVICE & MULTI - CODEC JUKE BOX Model H140 Model H140 Thank you for your purchase. Please read this manual carefully before using your new player. http://www. iRiverAmerica. com http://www. iRiverAmerica. com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] When recording by using the external microphone, connect the external microphone to the Line-In jack. Push the MENU/NAVI handle toward or , or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save. 32 33 Push the MENU/NAVI handle toward or , or push the REC button on the remote control toward BITRATE to select BITRATE TYPE to set recording quality. This is only for MP3 file. TO PAUSE RECORDING During recording, press REC button to pause recording, press REC button again to start recording. TO STOP RECORDING At recording standby mode, press and hold mode. When saving as WAV file, the Bitrate generally is 1411Kbps. (44. 1 KHz, 16Bit, Stereo) When saving the optical signal with 48KHz as WAV file, the Bitrate is 1536Kbps. (48 KHz, 16Bit, Stereo) Push the REC button to start recording. When recording from an external audio device, be sure to start the playback on that device when recording on to the H140. Recorded files are stored in folders matching the source name from where the audio was recorded. - Line In/Optical In : ROOT\RECORD\AUDIO\AUDIOXXX. MP3(WAV) - INT/EXT Mic : ROOT\RECORD\VOICE\VOICEXXX. MP3(WAV) Recording is automatically stopped if: - The H140's memory is full. - When the recorded MP3 file size is over 195MB - When the recorded WAV file size is over 795MB - The recorded time is longer than 5 hours. - When sampling rate is changed during optical recording Caution Optical recording can sample at 44. 1KHz or 48KHz. It is important to match the recording sampling rate with the playback sampling rate of your optical output device. Note, when the player is is Record Standby Mode, it will automatically shut off according to the "STOP POWER OFF" setting (Refer to page 43). button to go previous NOTE Volume level can not be controlled on the H140 while recording from an external device. While recording, press (STOP/PWR OFF) to stop recording and switch to recording standby mode. Press the REC button again to begin recording to a new file. TO PLAY THE RECORDED FILE Press button to play the recorded file at the recording standby mode. Press the REC button to pause recording. And press the REC button again to restart recording. 34 35 The H140 has various playback modes. Please refer to the function controls (see page 44 for details) for userdefined configurations. When the A-B/MODE button is pushed, the playback mode changes and an icon indicating the mode is displayed. EQ / SRS You can change the EQ to match your music style. - Normal / Rock / Jazz / Classic / Ultra Bass / User EQ - SRS / TruBass / WOW (Preset) / WOW (User) Whenever the REC button is pressed, EQ changes as the following order : (Normal Rock Jazz Classic Ubass User EQ SRS TruBass WOW(Preset) WOW(User)) You can set the EQ function by using Function Menu. EQ REPEAT Play a single track repeatedly. Play all tracks in the folder repeatedly. Play all tracks in the player repeatedly. - EQ (SRS Off) : SRS is deactivated and EQ set by user is operated. (Normal, Rock, Jazz, Classic, UBass, User EQ) or to play the previous or SRS 1) SRS Selection - SRS( ) : SRS is activated. [. . . ] The headphone cord functions as the antenna, they must be plugged in for best reception. Check the connection between your computer and the player to ensure that the cable is secure. Check the operation after connecting AC Adapter. Check whether the adapter plug is properly connected. [. . . ]