User manual IRIVER IMP-550

[. . . ] User Manual MULTI - CODEC CD PLAYER / FM TUNER Model iMP-550 TM Model iMP-350 Model iMP-550 Thank you for purchasing the product. Please read the manual carefully before use. http://www. iRiver. com http://www. iRiver. com FCC CERTIFICATION THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICES MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] 10: Plays the previous 10th or the next 10th song. Directory: Jump to the Previous/Next folder. Holding after one pushing of can be used for this setting. and button MENU(CONTROL) ADAPTER VOLUME 35 ON : When the Adapter is connected, the volume always remains at level 35. It is useful when using by connecting Car Audio. SOUND BALANCE When Sound Balance bar is moved to L (Left, 0), the sound outputs at the left earphone. When the lever is moved to R (Right, 40) the sound outputs at the right earphone. The default value is 20 and the sound outputs the same level at both earphone. EQ LIMIT ON : Limit the control of equalizer frequency to prevent distortion of sound. OFF : You can enjoy original sound though distortion of sound may occur. FF/RW SCAN SPEED : The fast scan speed can range from 1x/2x/4x/6x. and button can be used for this setting. 20 It is useful when fast-searching a music. SCROLL SPEED : Adjust scroll speed of the character(music title or artist) by 1x/2x/4x Vertical : The scroll goes from up to down Horizontal : The scroll goes from the left to the right. -10/+10 button -10/+10 : During playback, go back to the previous 10th track, and push it to +10 to go forward to the next 10th track. Directory : -/+10 button works as folder skip. AUTO PAUSE When Auto Pause is ON, you will need to press Play button after the disc loads. Auto Pause also pauses the disc after each song and you will need to press Play button to play. TAG AUTO EQ ON : Can automatically change EQ by reading the genre of TAG Information. OFF : EQ set by user is operated. EQ is selected by genre as follows : Rock : Classic Rock, Rock, Altern Rock, Instrumental Rock, Southern Rock, Rock & Roll, Hard Rock, Folk Rock, Gothic Rock, Progressive Rock, Psychedenic Rock, Symphonic Rock, Slow Rock, Punk Rock Jazz : Jazz, Jazz+Funk, Acid Jazz Classic : Classical, Opera, Chamber Music, Sonata, Symphony Metal : Metal, Heavy Metal, Death Metal Ubass : Bass, Booty Bass - 26 - - 27 - MENU(PLAYBACK MODE) PLAYBACK MODE REPEAT MODE / SHUFFLE MODE : The setting value changes when you press the MODE button. (Multi selection capable) h Pus MENU(PLAYBACK MODE) STUDY BEEP MODE This is the function to make beep sound whenever operating the buttons for blind persons, the function is same as 5 SEC MODE. To move Click Click BOOKMARK This is the function for fast search by using BOOKMARK. Bookmark function is activated under the Study mode. To select or Only the selected play mode will be applied when you press the MODE button (For details, please refer p. 15) Long slide of bookmark. lever to -10 will add/delete/move the INTRO MODE Intro: Plays the beginning 10 seconds of each track. Intro Highlight : Plays 10 seconds from 1 minute into each track in sequential order. For example, song A plays 10 seconds from 1 minute into the song, so the highlight ends at 1 minute 10 seconds. Bookmarks can be reserved up to 20 on a disc. When controlling the BOOKMARK, you can recognize what is the order of BOOKMARK by numbers of beep sound. Bookmark Add : Long slide -10/+10 lever to -10 and click PROGRAM/EQ button to add the present location into the bookmark. Bookmark Delete : Long slide -10/+10 lever to -10 and click MODE/CD FM button to delete the present location from bookmark. Whenever you press Mode/CD FM button, the bookmark will be deleted in backward sequence. [. . . ] This device must accept any interference received, including interference that may cause undesired operation. If your device needs repairs, you must arrange for the manufacturer to make them if you are to keep the device's FCC registration valid. This equipment, like other electronic equipment, generates and uses radio frequency energy. If not installed and used according to the instructions in this manual, this equipment may cause interference with your radio and television reception. [. . . ]