User manual IROBOT ROOMBA 400

[. . . ] Discovery/400 series Owner’s Manual Dear iRobot Roomba Owner, Thank you for purchasing an iRobot Roomba vacuum cleaning robot. You’ve joined the millions of people who clean with robots the smarter way to get it done. Please take a few moments to read this manual and get acquainted with your Roomba, to get the best performance from your robot. If you have any questions, visit our website at www. irobot. com for more information. [. . . ] The Remote WILL NOT dock if you have a Virtual Wall near the Home Base. Fluorescent lights can also impact Virtual Wall and Home base performance. For more detailed information, visit: www. irobot. com 17 Remote Control (optional accessory for select models) The Remote Control lets you conveniently control Roomba’s functions. You can use it to turn Roomba on and off, and steer it around your room without bending down. It also gives you remote access to commands. Original Remote Control Spot Directional Buttons Power CLEAN Max Pause SPOT CLEAN MAX PAUSE Roomba focuses on intensely cleaning a local area. To select AM 5  or PM, simply scroll past 12:00. Press 6  7 Press 8 to navigate to the minute field. to navigate to the Once/Weekly field. Press Press to choose Once or Weekly. Choose 9  Weekly if you want Roomba to clean on the same day and time every week. Press New/Save once to save the schedule. 10  The LCD will flash three times to indicate that the schedule has been set. D  on’t forget to send the schedule to both Roomba and the scheduling Virtual Walls. 20 iRobot Roomba Owner’s Manual Sending Schedules After setting a cleaning time, you need to send the schedule to Roomba and the scheduling Virtual Walls. To send a schedule to your Roomba: 1  Power on Roomba with the Power button. Open the Scheduler Remote Control’s front 2  cover, point the remote at Roomba and press Send All. The display will flash to indicate the remote is sending the schedule. Roomba will play a song to indicate the schedule is received and the Status light will begin blinking. Make sure Roomba is on the Home Base or in 3  the center of the area you want to clean. Roomba will clean at the time you have scheduled. Roomba’s Status light will blink amber to indicate that Roomba is scheduled to clean. To accept a schedule, Roomba must either be at least 8 feet from the Home  Base or charging on the Home Base and Roomba’s power must be on. iRobot Scheduler, Virtual Walls and Home Base all operate using invisible infrared beams. If used in the same area, Roomba may see multiple infrared signals and not respond to commands. Make sure all Virtual Walls are turned off when using Scheduler. For more detailed information, visit: www. irobot. com 21 Sending Schedules To send a schedule to the scheduling Virtual Walls: Press and hold the power button on each 1  scheduling Virtual Wall until the Scheduled light turns on. Scheduled light Point the Scheduler remote at each scheduling 2  Virtual Wall and press Send All to send the schedule. The display will flash, indicating that the remote is sending the schedule to the Virtual Wall. The Virtual Wall’s Scheduled light will blink to confirm that it is 3  scheduled to automatically turn on at the time you programmed. TIP: You can clear the schedule from the scheduling Virtual Wall and  Roomba by removing their batteries, or by deleting all cleaning times from the remote and re-sending the cleared schedule to the scheduling Virtual Walls. 22 iRobot Roomba Owner’s Manual Changing Schedules Open the Scheduler Remote’s cover. [. . . ] • Heed all warnings on Roomba, battery, charger and in owner’s manual. • Follow all operating and use instructions. • Refer all non-routine servicing to iRobot. ROOMBA USE RESTRICTIONS • Roomba is for indoor use only. Small children and pets should be supervised when Roomba is cleaning. [. . . ]