User manual IROX HB85

[. . . ] LOCK SWITCH * Locks all operation buttons while traveling preventing the battery drain J. SNOOZE/LIGHT BUTTON * Activates snooze function and EL backlight a d c a. Date in month/date or date/month format c. Indoor temperature in °C or °F d. [. . . ] The PM abbreviation will flash in the top left corner right under the DST icon. * Press UP (+) or DOWN (­) to select 12 or 24 hour time format. * Press the MODE button to enter into the day of the week selection mode ­ the abbreviation "EN" will flash on the lower right corner of the display. 8 * Press UP (+) or DOWN (­) to select the language for day of the week ­ English, German, French, Italian, Spanish or Dutch. * Press MODE button to enter into the programming mode of the time display format ­ the seconds digits will flash. * Press UP (+) or DOWN (­) to adjust seconds, minutes, hour, year, month and day * Press the MODE button for the last time to confirm the settings after the last parameter is set. TIME ZONE PROGRAMMING THE TIME ZONE * Select the Time Zone display mode by pressing the MODE button ­ "ZONE" abbreviation will be displayed on the lower left corner next to "DST" and "-8h" * Press and hold the MODE button until "-8h" flashes. * Use the UP (+) or DOWN (-) buttons to change the TIME ZONE hour in +/- 12 hour range Example: If the atomic time received from the Atomic Clock located in Japan (JJY60) is 3:00pm (Japan time) and the TIME ZONE is set to +8 hours (Hong Kong Time Zone), then the local time display will be 2:00pm If "ON" or "AUTO" is selected, the clock will automatically synchronize with the Daylight Savings Time in spring and fall. If Daylight Savings Time does not apply to your geographic area, an "OFF" setting has to be selected. * Press the MODE button to confirm the settings and return to the default LOCAL TIME display. 9 DST (Daylight Savings Time) MODE Daylight Savings Time mode control gives the opportunity to adjust the clock's time to Daylight Savings automatically, manually, or turn off this feature completely. * Press the MODE button to select the Daylight Savings Time (DST) mode. The mode is selected correctly if the abbreviation "DST" is displayed on the top left corner of the display and the word "Auto" is on the top right one. * Within concrete wall rooms such as basements or office buildings, the received signal may be weakened. Always place the Clock near the window for better reception. ALARMS The International Travel Clock has two alarms ­ Weekly [ ] and Single [ ]. If either of the alarms is activated, it will sound at the set time and the alarm icon will flash Mondays through Fridays. SETTING THE ALARM To set any alarm, * Press the ALARM button to select the ALARM mode. The default setting is the Weekly Alarm. If the Weekly Alarm is off, the icon along with "OFF" will be displayed. * Press the UP (+) button to select "7:00", entering into the alarm time setting mode. * Press and hold the ALARM button for two seconds. The hour digit will flash. * Adjust the hour by pressing the DOWN (-) or UP (+) buttons. Press and hold (-) or (+) buttons for faster digits adjustment. [. . . ] INDOOR TEMPERATURE The indoor temperature shares the same display's line with time. The temperature reading is updated every minute. NOTE: If the indoor temperature goes above or below the operating range stated in the specifications, the display will show "HH" or "LL" respectively. Press the °C/°F button to select the temperature in Celsius or Fahrenheit. 12 13 LOCK SWITCH Slide the LOCK switch to the direction shown on the unit the lock symbol [ ] will appear on the display meaning that all of the unit's operation keys are locked. [. . . ]