User manual IROX HBR324

[. . . ] When batteries are installed, the display will shows the "hPa" and "mBar". User should press the [Unit] key to the unit of pressure, it will shows "0" and "meter". User can use the [ ] or [ ] (rear panel) keys to change to "feet", or use the [Unit] key to confirm the unit. After user confirmed the unit of height, it will shows "10" with "meter" or "32" with "feet". [. . . ] 3b) Weather Forecast Alert A weather forecast alert alarm will go on when the weather forecast change to one of the status below: Heavy rain, heavy snowy or unstable stormy weather. It is not necessary and not possible to adjust the altitude of the weather station. After the initial start-up of the weather station, a first forecast will be made within the first 24 hours of operation. In periods of long stable weather conditions, it becomes difficult to make a reliable forecast. The weather forecast is solely calculated on the basis of barometric air pressure changes. The probability of a correct weather forecast is approximately 70% and is valid for an area of approx. 20-30 km around the location of the weather station. The forecast "Sunny" means at night "cloudless weather". Fogies not indicated by the weather station as this can occur with different weather conditions. If you travel with become impossible due to changes in altitude and location. You'll have to wait up to 24 hour so that the weather station can calculate a new forecast based on the conditions at the new location. Each press on the [MODE] button will change the display between clock with second, clock with day of week, zone time with day of week. Repeat the same procedure to set display language, °C/°F, UVI / MED/h, year, month, date, date-month format, 12/24, hour and minute. during the setting , press and hold [ ] or [ ] will increase or decrease the value rapidly. For display language, you can choose among English (En), German (DE), French (Fr), Italian (IT) and Spanish (SP) in that order. If there is an item you do not wish to change, simply press [ MODE ] to bypass the item. Use [ ] or [ ] to change it from -13h to +15h. 5e) DISABLE THE RECEPTION OF THE RADIO CONTROLLED CLOCK If you are using this product outside the central European timezone, you may disable the reception of the radio controlled clock, Press min. 3 Seconds the key [ ] to disable the automatic time signal reception. The reception signal [ ] will then disappear from the display. Repeat the same procedure to set single alarm. 6c) SNOOZE FEATURE When the alarm sound is on, press the snooze key enter snooze mode. [. . . ] Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. Do not tamper with the unit's internal components. [. . . ]