User manual IRRADIO DTR-3331

[. . . ] Read all the safety instructions before first use of your DVB-T Receiver. The adaptor power's cord should be plugged into AC 100V to 250V ~ 0. Position the power supply lead and other leads so that they are not likely to be walked on or pinched by things placed on or against them. do not use the appliance in humid or damp conditions. [. . . ] When the cursor stops on Area 5 in Daily Mode or Area 6 in Weekly Mode, press the <YELLOW> key to choose the detailed information corresponding to the current program, as shown in the below Figure. Press <|<< & >>|> key to switch among Sunday ---Saturday in Area 3; When the cursor stops in Area 5 Daily Mode and Area 6 in Weekly Mode, press the <BLUE> key to enter Wakeup Timer menu to book programs, as shown in the Paragraph 6. Press <EXIT> key to exit from EPG. If you want to watch teletext, please press <TEXT> on the remote controller to enter Teletext page. Input three digits to go to corresponding page you want. Press Up to go to the previous page; while press key <Down> to go to the next page. Press <Left> to back for 100 pages; while press Right to advance for 100 pages. Press <EXIT> key to exit from Teletext. To see the apitation information, press <SUB-TITLE> key to enter Subtitle menu of the current programs, as shown in the below Figure. Press <LEFT/RIGHT> key to choose whether to open Subtitle, press <UP/DOWN> key move upward and downward to choose language, as shown in the following figure. Press <GAME> key to enter game menu. You can choose three different games for play. There are two ways to record TV program. Before you record TV program you should select device. Press key <LEFT> or <RIGHT>, it will popup device list menu, you can choose one folder as the recording device. After selecting device, press key <EXIT> to exit device list menu. Then press key <REC>, you can record current TV program into selected device. If there is no signal or poor signal, it will popup message "REC PAUSE". There are two ways to setup EPG recording. In EPG menu, you can choose Timer by pressing blue key to setup wakeup timer window. once you choose wakeup mode as "RECORDER" , one EPG recording is setup. Under menu item "CONFIGURATION", you can choose wakeup timer to enter EPG recording setup. [. . . ] During scanning, press the red function key to stop it; press <EXIT> to stop and exit scanning. If any program is detected and the scanning process is finished, system will exit the scanning page and save the program, at the same time to play them automatically. If you understand much about digital TV and know the frequency range of the programs or if you want to scan the program at any frequency required, you can select Manual Scanning, which can save your time. You can also enter parameter configuration page via pressing menu (MENU->Digital TV->Installation->Manual Search). [. . . ]