User manual ISOUND HARMONY

[. . . ] HARMONY i. SoundTM Harmony Instructions: The i. SoundTM Harmony 2. 1 Speakers are designed to provide you with a sound experience like nothing you have heard before. Utilizing flat speaker technology, the Harmony 2. 1 Speakers are able to create full size speaker sound quality in a wafer thin design. [. . . ] The LED will confirm the speaker is powered on. Unwind the audio cable located around the 2X speaker. 2. Connect the speakers to the subwoofer by plugging in the white and red connection cables to the rear of the subwoofer. Make sure to connect the red cable to the red input on both the subwoofer and the speaker. Follow the same procedure for the white connection cable. Locate the power plug on the back of the subwoofer and plug it in to any standard wall outlet. When using the Harmony Speakers with iPod®, you can use the included iPod® stand for displaying your iPod®. The iPod® stand features different brackets to fit the iPod® model you are using. To connect an iPod® or any other audio device that features a standard headphone output, simply locate the audio out cable on the back of the Harmony subwoofer and connect it to your audio device of choice. Power on the Harmony Speaker by pressing the power button located on the back of the subwoofer to the on position. Power on your audio device and you are ready to experience a new level in sound quality. Volume and bass settings can be adjusted using the volume and bass controls located on the side of the Harmony subwoofer. [. . . ] For connecting other audio devices, follow the same procedures for connecting an iPod®. Note: Although the 2X Speaker System is designed to work with all audio devices with a standard headphone jack output, audio devices other than iPod® may not fit in the 2X iPod® bracket. FOR TECHNICAL SUPPORT PLEASE CONTACT: 1-877-999-DREAM or visit us on the web @ www. dreamgear. net www. isoundusa. com Trademark of New Transducers Limited P O B ox 4 7 8 Torrance, CA 90508 [. . . ]