User manual JABRA CLIPPER

[. . . ] While charging, the battery indicator changes from red to green, when fully charged . You can use the Jabra CLIPPEr during charging . Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period . Jabra therefore recommends that you recharge your device at least once a month . tURnInG YoUR JABRA CLIPPeR on AnD oFF - Press and hold the Multi-Function button until the LED turns green to turn it on . [. . . ] Skip one track forward** - Press and hold the `+' volume control button . Skip one track back** - Press and hold the `­` volume control button . * refer to phone's user manual ** Phone dependent Jabra CLIPPEr 6 english IMPORTANT: DO NOT EXTEND THE METaL-CLIP bY MOrE THaN FOUr (4) MILLIMETErS, aS IT WILL bEND OUT OF SHaPE PErMaNENTLY . Answer a call - Tap the Multi-Function button to answer a call . Reject a call** - Press and hold the Multi-Function button when the phone rings to reject an incoming call . Depending on your phone settings, the person who called you will either be forwarded to voice mail or hear the busy signal . Make a call** - When your Jabra CLIPPEr is connected to your phone, all calls made from your phone will automatically be transferred to your headset (subject to phone settings) . Redial last number** - Double tap the Multi-Function button . Adjust sound and volume* - Tap the +/- volume control button to turn volume up or down . Mute microphone when on a phone call - Tap the ­ and + volume button simultaneously to mute and un-mute . Adjust sound and volume* - Tap the +/- volume control button to turn volume up or down . HeADset AUDIo AnD VIsUAL InDICAtoRs The Jabra CLIPPEr provides status messages using both lights and audio signals . For example, the LED lights various colors to indicate battery level, incoming calls, on/off operations, etc . audio signals tell you when you have pressed a button or changed the volume; in-ear ring tones are also provided . * refer to phone's user manual ** Phone dependent Jabra CLIPPEr 7 english End a call - Tap the Multi-Function button to end an active call . LED light Solid blue Slow single blue flash Single blue flash Quick blue double flash Solid red Solid green Single red flash In pairing mode ­ see `Pair Jabra CLIPPEr to a phone or other device' Connected to a phone and in standby mode Connected to phone and active on call Incoming call Charging Fully charged Low battery The Jabra CLIPPEr Display LED turns off after 30 seconds of inactivity . The headset is still active, and light will flash again after a tap on the Multi-Function button or any call activity . Communication by Audio Indicators Your Jabra CLIPPEr employs sound alerts to communicate different actions or information . One important alert is the "Low battery" alert, which is two short beeps, and indicates 5 minutes of battery time remains . another sound alert is the "Mobile away" alert, which is four short beeps, and indicates you are moving out of range of your mobile phone . Jabra CLIPPEr 8 english What the LED means: The LED on the front side of Jabra CLIPPEr indicates different states of the product: UsInG YoUR JABRA CLIPPeR WItH tWo MoBILe DeVICes The Jabra CLIPPEr is capable of having two different Bluetooth® devices connected to the headset at the same time ­ e . g . a mobile phone and a PC for Internet telephony (VoIP) . This means that for example, you can use the same headset for both listening to music from your mobile phone as well as answering mobile phone calls and use it for Internet telephony (e . g . Skype or Google Talk) at the same time . Please note: Jabra CLIPPEr does not support two mobile phones at the same time . tRoUBLesHootInG & FAQ What is Bluetooth® Stereo/A2DP?- Bluetooth® Stereo enables a wireless connection of stereo audio between two Bluetooth® Stereo devices . In order to provide a wireless Bluetooth® Stereo connection between two devices, both devices must support the a2DP (advanced audio Distribution Profile) Bluetooth® profile . - audio Video remote Control Profile (aVrCP) enables you to remote control your music player from the Jabra CLIPPEr with functions such as Pause, Play, Stop & Skip Track (can be phone dependent) . How can I use the MultiuseTM feature on my Jabra CLIPPER? [. . . ] All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). [. . . ]