User manual JABRA DRIVE

[. . . ] The answer/end button on the speakerphone performs different functions depending on how long you press it. CHARGING YOUR JABRA DRIVE Make sure that your speakerphone is fully charged for two hours before you start using it. Use the USB cable to connect Jabra DRIVE to the car charger. Plug the car charger into your car’s power outlet. The status light will light up red while charging. [. . . ] Accept by pressing ‘Yes’ or ‘OK’ on the phone and/or confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. PLACING JABRA DRIVE IN YOUR VEHICLE ADDITIONAL FEATURES Play music and GPS directions* Make sure that the speakerphone and mobile phone are connected. When you play music or GPS application directions from your mobile phone it will automatically transfer to your speakerphone. If your phone does not allow this feature, press the answer/end button to transfer the music to the speakerphone. Music or GPS directions will automatically be paused when you have an incoming call. When the call is ended it will start playing again. Easy Voice Guidance** - Easy voice guidance informs you about your connection and low battery status. - Connected is announced when the in-car speakerphone reconnects with your phone. - Low battery is announced every 10th min when there is less than 30 min. Advanced Multiuse™ - Jabra DRIVE can be connected to two mobile devices at the same time. To learn more about Advanced Multiuse™ please go to the HOW TO HANDLE CALLS FROM TWO MOBILE PHONES section * Phone dependent ** Available ONLY in English Jabra DRIVE 8 english The Jabra DRIVE sits discreetly and conveniently on the sun visor using the integrated metal clip. The product can be easily taken on and off the sun visor. For optimal sound quality place the Jabra DRIVE right in front of you and speak directly into the speakerphone. HOW TO HANDLE CALLS FROM A SINGLE PHONE Single call Answer or end a call Tap the answer/end button on your speakerphone to answer or end a call The call will automatically transfer to your speakerphone*. If not tap the answer/end button Double tap the answer/end button to reject the incoming call Double tap the answer/ end button when the speakerphone is on and not used Long press the volume down button. A sound will indicate that the speakerphone is on mute every 10 seconds until the speakerphone is un-muted Long press the volume down button. A short sound will indicate that your speakerphone is un-muted Tap volume + or volume- to adjust the volume level. A short sound will indicate when the volume level is at its highest or lowest limit Make a call Reject a call* Redial last number* Mute Un-mute Adjust volume * Phone dependent Jabra DRIVE 9 english Function How to perform Hold active call Transfer an active call from your phone to Jabra DRIVE Press the answer/end button Three way call (Another incoming call) Release active-accept incoming call Hold active/accept incoming Reject incoming call Tap the answer/end button Press the answer/end button Double tap the answer/end button Three way call (The other call is on hold) Release active/activate held Hold active and activate held call Release held call Tap the answer/end button Press the answer/end button Double tap the answer/end button HOW TO HANDLE CALLS FROM TWO MOBILE PHONES Function How to perform Calls on two phones (One active call – the other phone is ringing) Release active/accept incoming call Reject incoming call Hold active/accept incoming*** Tap the answer/end button Double tap the answer/end button Press the answer/end button Jabra DRIVE ***Active calls on the two connected phones – other phone’s call is on hold 10 english Tap the answer/end button or press it for a long time Function Release active/activate held Hold active and activate held call Release held call How to perform Press the answer/end button Double tap the answer/end button TROUBLESHOOTING & FAQ I hear crackling noises Bluetooth is a radio technology, which means it is sensitive to objects between the speakerphone and the connected device. It is designed for the speakerphone and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc. ). I cannot hear anything in my speakerphone - Increase the volume in the speakerphone. - Ensure that the speakerphone is paired to a device that is playing. - Make sure your phone is connected to the speakerphone by tapping the answer/end button. I am having pairing problems - You may have deleted your speakerphone pairing connection in your mobile phone. [. . . ] All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). [. . . ]