User manual JABRA GN8110

[. . . ] Simply plug the USB connector u into any USB port on the computer. For Windows 98 SE and Windows 2000: To use the GN 8110 USB the first time, you need to install the USB drivers necessary for the computer to recognise the device. Connect the GN 8110 USB to your Computer ­ Windows 98 SE and 2000 Turn on your computer and let it complete the boot-up process. Make sure that you are not running any applications. [. . . ] 13 Before using your headset, join the Quick Disconnect to the mating connector on the GN 8110 USB. These drivers are typically pre-loaded in Windows. If you upgraded your system to Windows 98 SE or Windows ME, you may need to use the upgrade disc during this installation. Add New Hardware Wizard ­ USB Composite Device 1 The Add New Hardware Wizard indicates that is has found the new USB Composite Device. 2 The Wizards prompts you to search for the best driver for your device or select the driver you want from a displayed list. 3 Windows now searches for new drivers in a specific location. 4 The Wizard indicates that it is ready to install the best driver for this device. Testing 14 To test that the speaker volume in your headset is working and set at a comfortable level, click once on the speaker icon in the system tray. click on the volume adjustment slider for a system sound. Adjust the volume to a level that is comfortable for you. The Multimedia Properties window allows you to make advanced adjustments; go to the Volume Controls section of this manual. To test the microphone, use the sound recording utility that comes with Windows. go to Start/Programs/Accessories/Entertainment/Sound Recorder. 15 Position the microphone approximately one finger width away from your lower lip. 16 Click the red Record button and record a voice file. If you hear your voice, recording is successful and the microphone is working properly. If you cannot hear your voice, go to the Frequently Asked Questions section of this manual. Although GN Netcom professional headsets have built-in hearing protection, computers are capable of generating extremely loud sound bursts such as modem connections. Always check the volume level before putting on the headset. 6 The Wizard prompts you to search for the best driver for your device or select the driver you want from a displayed list. [. . . ] Standard PC CD players do not support USB audio without additional software. Why can't I hear my voice when I record a voice file in the Sound Recorder?Be sure that the Speaker Volume slider is set at least to the middle and the Mute All box is not selected. Be sure that the Microphone Volume slider is set at least to the middle of the control. [. . . ]