User manual JABRA SUPREME

[. . . ] When light goes out the charge is complete. A full charge takes approximately two hours. Only use the charger provided in the box – do not use chargers from other devices as this may damage your headset. Also you should not use your supplied SUPREME charger to charge other devices. [. . . ] Just say “Answer” to take the call and “Ignore” to reject. Voice control – Incoming call Your voice to SUPREME “Answer” What it does The headset captures your command and directs the phone to take the call The headset captures your command and directs the phone to reject the call “Ignore” At any time when you are connected to a phone and not in a call or streaming multimedia, you can tap the Voice button, wait for Jabra SUPREME to ask you to ”Say a command”, and then say one of the following commands. Voice control – Outgoing calls, pairing, battery level etc. Your Voice to SUPREME ”Pair new device” ”Redial” ”Call back” What it does Puts the SUPREME into pairing mode SUPREME redials the last outgoing call made on the phone Calls back the last incoming call recieved on the SUPREME Jabra SUPREME 10 english Type Definition ”Phone commands” ”Battery” ”What can I say?” ”Cancel” Activates your phone’s voice dialing feature* Will tell you the battery level on SUPREME Will tell you what your options are Will cancel the current operation and close the voice menu The Jabra SUPREME is loaded with voice guidance that talks you through setup and daily operation. in the table below you can see the most common announcements. Voice guidance SUPREME announcements to you “Welcome!Search for devices and select your Jabra hands free device. If asked for a PIN code enter 0000” ”Pairing failed” “Connected” “Two devices connected” What it means The SUPREME is in pairing mode. You will hear ”Power on” when you enable and a tone when you disable the voice features. Turn on the SUPREME and press and hold the Answer/end, VOL+ button together for about 6 seconds. When the SUPREME is reset it will automatically go into pairing mode. Enable or disable Voice Guidance and commands Reset to factory default Download Firmware updates and additional languages Go to jabra. com/SUPREME and download the latest firmware and additional languages. * Phone dependent Jabra SUPREME 13 english Function Action TROUBLESHOOTING & FAQ I hear crackling noises - Bluetooth is a radio technology, which means it is sensitive to objects between the headset and the connected device. It is designed for the headset and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc. ). I cannot hear anything in my headset - Increase the volume in the headset. - Ensure that the headset is paired to a device that is playing. - Make sure your phone is connected to the headset by tapping the Answer/End button. I am having pairing problems - You may have deleted your headset pairing connection in your mobile phone/device. Follow the pairing instruction to pair it again. I want to reset the pairing list in my headset - The headset registers a list of up to 7 mobile phones. To clear the pairing list and reset the Jabra SUPREME to factory settings you can turn the SUPREME on while pressing the VOL+ and Answer/end button for about 6 seconds. The next time you power on the Jabra SUPREME it will automatically go into pairing mode. Will the Jabra SUPREME work with other Bluetooth equipment?- The Jabra SUPREME is designed to work with Bluetooth mobile phones. [. . . ] All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). [. . . ]