User manual JABRA SUPREME UC

[. . . ] Release the button when you hear ”Welcome, you are now ready for pairing”. You will be voice guided through the pairing process. Follow the instructions, and when pairing is complete you will hear an announcement that you are connected. You are now ready to start using your Jabra SUPREME UC. [. . . ] THREE WAY CALLING - To put the first call on hold and accept an incoming call, press and hold (2 secs) the Answer/end button. To switch between the two active calls, press and hold (2 secs) the Answer/end button again. PLAY MUSIC, PODCASTS OR GPS - Audio played on a connected device will automatically transfer to the Jabra Supreme UC (device dependent). ANSWER INCOMING CALL WHEN PLAYING MUSIC - If there is an incoming call while listening to music on the Jabra SUPREME UC, the music will pause and you will hear your ringtone or caller ID. You can choose to answer or ignore the call. When the call is ended the music will automatically play again, or may need to be manually resumed. JABRA SUPREME 7 ENGLISH ACTIVATE MOBILE PHONE VOICE COMMANDS - Press and hold (2 secs) the Answer/end button on the headset to activate the phones voice commands (e. g. SiriTM). JABRA VOICE CONTROL HEADSET VOICE COMMANDS Voice command ”Answer” ”Ignore” ”Pair new device” ”Redial” (last device paired*) ”Call back” (last device paired*) ”Phone commands” ”Battery” ”What can I say?” ”Cancel” What it does Answers an incoming call Rejects an incoming call Puts the Jabra SUPREME UC into pairing mode Redials the last outgoing call made on the device (phone dependent) Calls back the last incoming call received on the Jabra SUPREME UC Activates your device’s voice dialing feature (phone dependent) Will tell you the current battery level Will tell you a full list of voice commands Cancels the current operation and closes the voice menu *Redial and Call back only function with the device that was paired last. MOBILE PHONE VOICE COMMANDS To access your movile phone’s voice commands (e. g. SiriTM) press and hold (2 secs) the Answer/end button on the Jabra SUPREME UC. JABRA SUPREME 8 ENGLISH Jabra Voice Control allows you to speak to instruct the headset, using a variety of voice commands. To activate the headset voice commands tap the Voice Control button on the Jabra SUPREME UC. You will be asked to ”Say a command”: JABRA VOICE GUIDANCE Jabra Voice Guidance guides you through using your headset. Search for devices and select your Jabra hands free device. If asked for a PIN code enter 0000” ”Pairing failed” ”Connected” ”Two devices connected” ”Disconnected” What it means The Jabra SUPREME UC is in pairing mode. Pairing failed Jabra SUPREME UC is connected to a phone/device Jabra SUPREME UC is connected to two phones/devices A connected phone/device is turned off, is out of range, or has Bluetooth disabled while in range The Jabra SUPREME UC battery level is below 10% Incoming call on phone/device that supports caller ID (PBAP) ”Battery level is low” ”Call from <name from phone address book or number>” JABRA SUPREME 9 ENGLISH STATUS DISPLAY Flashing blue Solid blue Solid Green Bluetooth pairing mode Bluetooth connected. Calls or music are not active Bluetooth connected. Calls or music are active ADDITIONAL FEATURES PLAY MUSIC, PODCASTS, OR GPS Music, podcasts or GPS on your phone/device will automatically transfer to the Jabra SUPREME UC. Any incoming calls will pause the audio, and the call can be answered or ignored. The audio will resume after the call has ended (phone dependent). USING TWO DEVICES WITH THE HEADSET (ADVANCED MULTIUSE®) When two devices (e. g. your PC and your phone) are connected to the headset you can place and answer calls on both devices and switch between the two. In this state the primary device (the device paired last) will be used for voice dialing, last number redial and call back. If you receive a second call when you are already on a call, you will be alerted by a tone. You can then: - To put the first call on hold and accept the incoming call, press and hold (2 secs) the Answer/end button. The battery indicator light will flash green while charging. [. . . ] All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). [. . . ]