User manual JAMICON 3VAAV

[. . . ] User Manual V1. 0 3VAAV Copyright 2000 Publishing. This manual, software and firmware described in it are copyrighted by their respective owners and protected under the laws of the Universal Copyright Convention. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, biological, molecular, manual, or otherwise, any part of this publication without the express written permission of the publisher. All product s and t rade names des cribed within are mentioned for identification purpose only. [. . . ] While Award has designed the custom BIOS to maximize performance, the factory has the right to change these defaults to meet their needs. CPU SPEED SEETING Use this menu to specify your settings for CPU/DIMM frequency control. INTEGRATED PERIPHERALS This section page includes all the items of IDE hard drive and Programmed Input / Output features. PASSWARD SETTING Use this menu to set User and Supervisor Passwords. IDE HDD AUTODETECTION Automatically configure hard disk parameters. SAVE & EXIT SETUP Save CMOS value changes to CMOS and exit setup. EXIT WITHOUT SAVE Abandon all CMOS value changes and exit setup. 3VAAV User's Manual 3-3 STANDARD CMOS SETUP The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. Date The date format is <day>, <date> <month> <year>. day The day, from Sun to Sat, determined by the BIOS and is display-only date The date, from 1 to 31 (or the maximum allowed in the month) month The month, Jan through Dec. year The year, from 1900 through 2099 Time The time format is <hour> <minute> <second>. The time is calculated based on the 24-hour military-time clock. is 13:00:00. 3-5 3-6 3VAAV User's Manual Primary Master/Primary Slave/Secondary Master/Secondary Slave The categories identify the types of 2 channels that have been installed in the computer. There are 45 predefined types and 4 user definable types are for Enhanced IDE BIOS. Press PgUp or PgDn to select a numbered hard disk type or type the number and press <Enter>. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use Type "User" to define your own drive type manually. If you select Type "User", you will need to know the information listed below. Enter the information directly from the keyboard and press <Enter>. This information should be included in the documentation from your hard disk vendor or the system manufacturer. If the controller of HDD interface is ESDI, the selection shall be "Type 1". [. . . ] You may also press <Esc> to abort the selection and not enter a password. To disable a password, just press <Enter> when you are prompted to enter the password. A message will confirm the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup freely. [. . . ]